How do you install a basic handrail?

Instructions

1. Locate and Mark Studs. Use a stud finder to locate the studs at the handrail bracket locations.
2. Cut Handrail to Length. Measure and cut the handrail to the desired length.
3. Mark Handrail Height.
4. Mark Locations for Brackets.
5. Attach Handrail Brackets to Wall.
6. Attach Handrail to Brackets.

What is a base rail for stairs?

A staircase base rail (also known as a bottom track) functions as a track for the stair spindles and are supported by newel posts on either end. There are three different types of base rail, grooved, ungrooved and glass grooved.

What height should a handrail be on a landing?

between 900mm and 1000mm
You should fit a handrail at a height between 900mm and 1000mm from the pitch line of the stairs, or the floor for landings. This is approximately 35.4–39 inches.

Do you glue spindles?

Usually a spindle that has split along the grain line can be repaired in situ. Simply apply PVA glue into the split, squeeze the wood together, and then wipe over the surface with a damp rag. Then to help the glue set, bind your spindle together with waxed string or self-adhesive tape.

How do you measure a stair handrail?

Measure the stair and purchase the stair railing Before you go shopping for your handrails for stairs, measure from the nosing of the top landing to the floor at the bottom of the stairs and add 2 ft. This is the length of stair railing material you’ll need.

Do you need a return on a handrail?

Handrail extensions must return to a wall, itself or the walking surface. Note: While it is a common practice to leave a gap between a wall return and the wall, some inspectors have rejected this as they consider it a return toward the wall and not a return to the wall.

What is the post at the bottom of the stairs called?

The post (also called a newel) is the vertical structure that connects the stair or floor to the railing system. Spindles, which are vertical wood or metal structures, are interspersed between posts to provide a safety barrier along the stair system. Shoe is the bottom plate that spindles (or glass) are set into.