What is wet mix macadam?

Wet Mix Macadam consist of laying spreading and compacting of clean, crushed, well-graded granular materials on a prepared and approved Granular sub-Base. The material is well mixed with water and rolled to a dense mass.

What is wet mix design?

It is a road base material consisting of crushed rock/slag usually premixed with controlled amount of water sufficient for adequate compaction.

What is wet mix in Road Construction?

Wet Mix Macadam(WMM) work includes laying and compacting clean, crushed, graded aggregate and granular material, premixed with water, to a dense mass on a prepared GSB layer or existing pavement as per the requirement of the project.

How many grades are there in WMM?

3 grades
For the construction of the WBM roads aggregates are used in the sub-base, base and surface course and so the aggregates are divided into 3 grades according to their size.

Why is Wmm used in Road Construction?

Wet Mix Macadam (WMM)-Grading, testing and method of construction. Wet Mix Macadam construction is an improvement upon the conventional Wet Bound Macadam (WBM) and is intended to be as an alternative and more durable pavement layer in roads and highway works .

Why is Wmm used in road construction?

What is DLC in road construction?

Dry Lean Concrete (DLC) is an important part of modern rigid pavement. It is a plain concrete with a large ratio of aggregate to cement than conventional concrete and generally used as a base/sub base of rigid pavement.

What is the size of WMM?

WMM is mixed with designed proportion of aggregates and water content, laid and compacted in layers till designed thickness achieved. The maximum aggregate size is limited to 65mm in GSB and WMM is limited to 20mm.

Why is Wmm better than WBM?

The WMM roads are said to be more durable. The WMM roads get dry fast and can be opened for traffic within less time as compared to the WBM roads, which take about one month for getting dry. WMM roads are soon-ready to be blacktopped with the Bituminous layers. WMM roads are constructed at a faster rate.

What is the density of wet mix macadam?

What is density of WMM? Wet Mix Macadam (WMM) has bulk density of 2200-2300 Kg per Cum.

What is the ratio of DLC?

Concrete Subbase Course(DLC) mixing ratio: As per MoRTH, the mix shall be proportioned with a maximum aggregate cement ratio of 15:1.

What is density of WMM?

What is the difference between wet mix macadam and water bound macadam?

Difference Between WMM and WBM Road Here are the differences between WMM (Wet Mix Macadam) and WBM (Water Bound Macadam) roads. WMM roads are more durable. WBM roads are less durable. WBM roads take time to get dry.

What is the slump value of PQC?

The slump value of PQC with natural CA was measured as 28 mm.

What is difference between wet mix and GSB?

The GSB is granular sub base and WBM is water bound macadum. The GSB is used as sub base course and it also works as filter media,as it contains coarse sand and shingle. The. WBM is used as base course and it contains stone metal mixed with binding material.

https://www.youtube.com/watch?v=rjqGnJ6OaZA