How do you align in Inventor?

How do you align in Inventor?

Align a Drawing View

  1. Select a view.
  2. Right-click, and then select Alignment. To add an alignment to a view, click Horizontal, Vertical, or In Position. Then click the parent view for the alignment.
  3. (Optional) To add a different alignment, add the new alignment after you remove the existing alignment.

How do you fix points in Inventor?

Click a curve, center point, midpoint, or point. Continue to click curves or points to fix, as desired.

How do I center an image in Inventor?

The key to centering the image is to use a layout. Here we add a VerticalArrangement and then drag an Image control inside the VerticalArrangement. Select the VerticalArrangement, and then, under Properties set its AlignHorizontal property to “Center:3”, as shown.

How do I align a section view in Inventor?

Override Section View Alignment During Placement

  1. Context menu. Right-click in the graphics window. and deselect Align View.
  2. Section View dialog box. Under View Projection, select None.
  3. Hold down the CTRL key. Click to place the section view where you want it and then release the CTRL key.

How do you use the emboss feature in Inventor?

Emboss or Engrave a Face or Plane

  1. Click 3D Model tab Create panel Emboss .
  2. Using the Profile selector, click in the graphics window to select one or more profiles (sketch geometry or text) to emboss or engrave.
  3. Choose an emboss type:
  4. Specify the options associated with the type of emboss you’re performing:
  5. Click OK.

How do I align dimensions in CAD?

To Align Dimensions (AutoCAD Mechanical Toolset)

  1. Click Annotate tab Dimension panel drop-down Align. Find.
  2. Select the base dimension (1).
  3. Select the dimension(s) to align to the base dimension (2).
  4. Press ENTER.

What is an aligned section view?

An aligned section view is drawn as if the cutting plane line ran straight across the object. The cutting plane line is rotated into a straight position, and the section view is projected.

How do you etch in Inventor?

On the Sketch tab, use commands to create a profile to emboss or engrave. Click Sketch tab Draw panel Text and create sketch text. Click sketch commands and create sketch geometry….Emboss or engrave feature

  1. Specify the depth.
  2. Click Wrap to Face to wrap the profile on a curved face.
  3. Click Flip to set the direction.

How do you use symmetry constraints in Inventor?

Place Symmetry constraints in assemblies

  1. On the ribbon, click Assemble tab Relationships panel Constrain .
  2. In the Place Constraint dialog box, under Type, click Symmetry constraint.
  3. Select the first geometry to constrain.
  4. Select the second geometry to constrain to the first selection.
  5. Select the symmetry plane.