What is the difference between input 1 and 2 in GarageBand?

Under “Input”choose which of ONE’s inputs you want to use. Input 1 is ONE’s Mic input… either external or the internal Mic and Input 2 is always ONE’s 1/4” instrument input. You should now see GarageBand open with a single track.

Should my tracks be mono or stereo?

Mono recording is perfect for vocals and can work on other instruments. Stereo recording works well on acoustic guitar and even drums. Mono mixing helps you end up with a track that sounds good everywhere. And stereo mixing shows you the beautiful stereo landscape you’ve created.

Is GarageBand stereo or mono?

You only use the stereo settings for a stereo source. Your mics are not stereo, therefore you should select MONO. You will then get a track that you can pan anywhere in the stereo spectrum you like, which is what you really want.

Does mono audio make a difference?

What Is Mono Audio & What Is It Used For? Mono audio means that only one signal is sent to all speakers. The same signal can be reproduced through several speakers, but, since there won’t be any difference between them it won’t create a stereophonic wide effect, it will just make everything louder.

How do I use two inputs in GarageBand?

Choosing the Aggregate Device in GarageBand

1. Go to File > New and select the type of project you wish to use.
2. Look in the bottom left corner and click on the arrow beside Details.
3. Click Input Device and select the aggregate device from the list.
4. Choose the output device you want to use.
5. Click Choose.

How do I use two microphones on GarageBand?

Record to multiple audio tracks simultaneously

1. In GarageBand on Mac, set the instrument or microphone input source for each track you want to record to.
2. Choose Track > Configure Track Header.
3. Click the Record Enable button in the track header of each track you want to record to.

Does GarageBand export in mono?

Garageband doesn’t convert mono files to stereo. It only bounces the project in stereo. You can always tap into a Garageband file (one named . band) and right click to select “show contents”.

How do you mono in GarageBand?

11 Answers

1. Click on the track that you want to convert.
2. Command-D or >Track>New Track with duplicate settings to create a new track.
3. Command-V to paste the original regions to the new track.
4. Shift-Click on the original region(s) to highlight it again.
5. Command-J to join the regions, select “Mono” for the mix-down.

Should I record guitar mono or stereo?

Choosing whether to record your guitar in mono or stereo is important to understand because it can have a big impact on your choices later on. The best practice is to record guitar in mono. If you want to record using multiple microphones, record each microphone in a separate track and record each one in mono.

Should you record guitar in stereo or mono?

The best practice is to record guitar in mono. If you want to record using multiple microphones, record each microphone in a separate track and record each one in mono.

Can I sing with mono?

Virtually all voice professionals would agree that you definitely should NOT sing if: 1. You have any malady that directly affects your throat or lower respiratory system (sore throat, swollen glands, strep throat, laryngitis, bronchitis, mono, or anything that manifests as an unpleasant, hacking cough).