Can you use plasterboard around a log burner?

The shield must, of course, be non-combustible (do not use plasterboard as it is not A1 fire-rated and may gradually crumble). There must also be an air gap between the shield and the combustible material of a minimum of 12mm (other wise the combustible material soon ends up the same temp as the shield).

Can you plaster behind a wood burning stove?

It is important to consider safety alongside design when creating your log burner fireplace. Using wallpaper is not recommended because it will heat up and peel off. Similarly, plastering behind your stove will result in cracks forming due to the heat.

Can you plasterboard inside a fireplace?

Do NOT use plasterboard of any kind inside the fireplace recess, even the pink fire-resistant stuff, as this is not allowed as plasterboard is not officially non-combustible (plasterboard okay on chimney breast though).

Can you tile on plasterboard behind log burner?

Normal gypsum plaster is not heatproof. The backer board should be ok but if the log burner is within three or so inches of the wall, the skim coat will craze and crack, and probably eventually fall off.

Are plaster boards heat resistant?

Plasterboard cannot be considered fire resistant on its own.

Does plaster crack with heat?

Regular gypsum plaster often cannot cope with the heat generated by a woodburner and may begin to crack or peel off, either almost immediately after the stove is lit or through gradual wear and tear.

What can I put on the wall behind my wood burning stove?

Common fireproof wall ideas for behind a stove include stone, brick and tiles. The look of a wood burning stove can be enhanced by using a faux panel (such as a stone veneer look) or using a fireback.

What do you put on a wall behind a wood burner?

We recommend using porcelain tiles, which are very heat resistant. Most wood burning stoves have insulation blocks in the back and sides to minimise the heat escaping, and there should also be a minimum of 150mm (6 inches) around the back and the side of the stove for ventilation.

How much heat can plasterboard take?

Plasterboards are not suitable for use in temperatures above 49°C but can be subjected to freezing conditions without risk of damage. The thermal insulation and ventilation requirements of national Building Regulations aim to reduce the risk of condensation and mould growth in new buildings.

Can plaster withstand high heat?

The maximum working temperature of plaster is 1,200 °C (2,200 °F), so higher melting temperature materials would melt the plaster mold. Also, the sulfur in the gypsum reacts with iron, making it unsuitable for casting ferrous materials.

What do you put on the wall behind a log burner?

Is plasterboard 30 min fire resistant?

If the ceiling is plasterboarded, then 12.5mm thick boards are required to give 30 minutes’ fire resistance. You may have to provide an additional skim coat or additional plasterboard to the ceiling.

What temperature does plaster crack?

At 32 degrees Fahrenheit (0 degrees Celsius) and below plaster will freeze on the wall and cause weakening of the plaster. Damage to the plaster can be so severe that you can rub it off the wall by using your hand.

What plaster is heat resistant?

Vitcas® Heat Resistant Plaster is a high temperature resistant smooth finish protection up to 650oC /1200 oF for use on walls and chimney breasts, hole in the wall fires and cassette stoves. Should be used in conjunction with Vitcas® Fireplace Render.

What kind of board do you put behind a wood stove?

Things You’ll Need Mount a backer board on the walls adjacent to your wood stove. Backer board is a heat shield that is found behind wood-burning stoves. A heat shield is necessary to protect the walls from damages due to constant use of the stove and to protect your home from possible fires.

How do you protect a wall behind a wood stove?

Faux Panels. A common way to help protect the wall behind a wood stove and create a backdrop for your stove includes using masonry veneer faux panels. Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room.

Are plaster walls fire resistant?

Plaster does not emit any toxic gases when burned, but it can cause severe burns when exposed to open flames. Clay plaster is a type of dry wall that is becoming more popular in modern construction practices.