How can I use beetel 450TC1 as a WIFI router?

All you have to do is got to your router settings page, 192.168. 1.1 and username: admin and password: admin . Go to Interface setup -> LAN . Check the DHCP option and you can see thre options like Enabled , Disabled, Relay.

How do I reset my beetel 450tc2?

Press the Factory reset button with a straightened paperclip pin or something that gets through the tiny hole, and hold it for about 15 seconds! (till you see all the lights flashing) The Beetel 450TC3 router will reboot automatically. the unit has been reset and is ready to use.

How do I reset my beetel router password?

Reset the Beetel 450TC3 router The reset button is located on the back of the router. Use a sharp tool eg. paperclip or a pen to press the button. Press and hold the button for 20 seconds, the router will restart and reset to the factory settings.

How can I find my beetel modem WIFI password?

1.1 (the most common IP for Beetel routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Beetel router is admin. The default password is password.

How do I reset my beetel 777VR1 router?

All you need to do is to reset your 777VR1 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings.

How do I log into my vdsl2 router?

Type http://www.routerlogin.net. Enter the modem router user name and password. The user name is admin. The default password is password.

What is the password of 777VR1?

1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Beetel 777VR1 is admin. The default password is password.

How do I setup my 777VR1 wireless router?

Configuring Airtel VDSL router 777VR1 after resetting accidently

1. Default Route Selection: Specified.
2. Channel Type: PTM.
3. Channel Mode: PPPoE.
4. Check Enable NAPT and Enable IGMP.
5. Username: Call customer care to get it.
6. Password: your account no which you used to login your router.
7. Type: Continuous.
8. Default Route: Enable.

How do I reset my vdsl2 router?

What can I do if I forget the login username/password of my DSL modem/router?

1. Step 1 Turn off the router.
2. Step 2 Press and hold the reset button on the rear panel with a pin, then turn on the router.
3. Step 3 Release the reset button and wait for the device to reboot.
4. Note:

How can I get my beetel WIFI password?

The default username for your Beetel router is admin. The default password is password. Enter the username & password, hit “Enter” and now you should see the control panel of your router.

What is ADSL username?

Login to the ADSL Router using http://192.168.1.1. • Username and password are ‘admin’ and ‘admin’.

Is 777VR1 router or modem?

777VR1 777VR1 Dual Band Wireless Router With Modem (White, 300 Mbps) | Udaan – B2B Buying for Retailers.

How do I re configure my router?

How to Reset Router From Configuration Page

1. Type your router’s IP address into any web browser’s search field.
2. Enter your username and password when prompted.
3. Go to System or System Tools.
4. Look for Restore or Factory Default.
5. Click Restore or Reset and OK to confirm.
6. Wait for the router to reboot.