How do I fix E6 error on my dishwasher?
Fisher and Paykel Dishwasher Dishdrawer Error Code E6 = The first 4 program indicator lights are flashing. Error Code Cause: Flood switch activated. How To Fix: Turn the water and power off to the dishwasher and back on to try and reset. Check Flood Switch.
How do I clear the error code on my Bosch dishwasher?
You can easily clear error messages on your dishwasher by resetting it. This is done by holding the start button for three seconds until it reboots. If that does not work, you can reset it manually by unplugging the dishwasher and then plugging it back in.
What does C6 mean on Bosch dishwasher?
Water Temperature Too Low
Bosch Dishwasher – C6 – Water Temperature Too Low After 20 Minute Extension – Repair Parts | Repair Clinic.
What is E06?
The error code E06 means Cover Open. It is displayed if the scanner’s top cover is open, or the top cover sensor has failed. Close the scanner’s top cover.
What does E6 mean on dishwasher?
An E6 error code of the Bosch dishwasher means that there are problems with the sensor that controls the water turbidity. It is also called the Aqua Sensor. In the dishwasher, this sensor detects the turbidity of the water due to the presence of small particles of dirt, food residues and other things inside it.
What does E4 mean on a dishwasher?
Overflow sensor
E4 – Overflow sensor. Water pressure may be set to high. The inlet hose may not be properly connected. There is a malfunction or problem with the drain check for an obstruction.
What does 001 mean on my Bosch dishwasher?
If a Bosch dishwasher displays the error code e01, it means the control panel is malfunctioning. But, do not hurry to buy a new board. First, check the electricity supply and the wires connected to the panel. If the dishwasher does not work at all or fails, the faulty control board is probably the case.
What is E06 error in PF?
Reason for this error – E06: PF ADVANCE NOT ALLOWED. APPROVED PF TRANSFER CLAIM IS AVAILABLE IN THE SYSTEM.
Why does my washing machine say E06?
If your washing machine shows an E06 error code or the power light blinks six times before pausing the fault could lie with an unbalanced load! We have investigated the best practice to levelling out your wash load to help get your appliance working again.
What does E 01 mean on a Bosch dishwasher?
control panel
If a Bosch dishwasher displays the error code e01, it means the control panel is malfunctioning. If the dishwasher does not work at all or fails, the faulty control board is probably the case.
What does error code E06 mean on Bosch dishwasher?
Bosch dishwasher error code E06. The indication of the E6 Error code on the display of the Bosch machine is a signal about issues with the AquaSensor, the detector responsible for measuring the turbidity if the water in the device.
How do I get a dishwasher error code that is not listed?
Getting a dishwasher error code that is not listed below? If you couldn’t find your error code on the list, please contact Bosch Customer Service at 1-800-944-2904. If you’re getting a dishwasher error code, it means something needs your attention as some maintenance might be needed.
Why does my Bosch dishwasher have different fault codes?
If your Bosch dishwasher displays fault codes in a different format than E00 (such as on models with a full LCD display) then you might be shown the following fault codes instead. Fault code A or B Cause:Fault with the water sensor. Action:Inspect dishwasher for evidence of leaks.
What does error code E16 mean on my dishwasher?
If error occurs again then your dishwasher has a leak. Fault Code E16 Cause:Water inlet valve fault. Action:Check inlet valve and water supply. Go to:Why is My Dishwasher Not Filling With Water?