How do I get my fireplace pilot light back on?

How do I get my fireplace pilot light back on?

While pressing and holding in the black knob, press the RED igniter button repeatedly; the pilot will generally light with two or three pushes on the igniter. 4. Once the pilot is lit, continue to hold the valve knob in for 30 seconds, then release the knob and it will pop back out.

Why can’t I light the pilot light on my gas fireplace?

Check Your Igniter and Thermocouple If nothing is blocking the tubing, and gas is flowing out, there might be something wrong with the spark igniter and thermocouple. Make sure there’s no debris lodged between the two. If the pilot light ignites but doesn’t stay lit, you might need to replace the igniter.

Where is the pilot light knob on gas fireplace?

It is mounted to the back of the burner pan. Hold knob in for about 60 seconds after it lights. Release slowly and if pilot stays lit then turn it to on position and logs will light. If you have any questions refer to your owner’s manual.

What happens if your pilot light goes out?

If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail, gas will continue to flow even after the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.

Can I relight my own pilot light?

If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.

Does my gas fireplace have a pilot light?

Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren’t using your fireplace. If you don’t see the valve, it may be behind the fireplace, so look for it there and turn it on. Pull the fixed glass assembly off of the fireplace.

Does the pilot light always stay on in a gas fireplace?

Should the pilot light always be on in a gas fireplace? Most gas fireplaces rely on a “continuous pilot light,” a type of pilot that remains lit so long as gas is flowing to the unit. If you have a continuous pilot light system, you should always see a pilot flame unless you have manually turned the system off.

How do I light the pilot on my gas fireplace?

Light the pilot on a gas-log fireplace by turning the gas flow knob to the “pilot” setting, holding the knob in and using a match to ignite the pilot. After lighting the pilot, continue to hold the control knob in for about 30 seconds, or the pilot may go out. Once the pilot stays lit by itself, turn the gas flow knob to the “on” position.

How to light the pilot light on a gas fireplace?

Turn the knob from the “Off” to the “Pilot” position.

  • Push in the pilot knob,which manually sends gas into the system.
  • Push the igniter button once every second until it lights.
  • After the pilot lights,keep the pilot button held down about 15 to 30 seconds to warm up the thermocouple and ensure that the flame stays lit.
  • Release the pilot knob.
  • Should I keep the pilot light burning on a gas fireplace?

    Leaving the gas on keeps this compound moving out of the tubes. Keeping the pilot light on will also keep moisture out of the unit and in turn, help prevent corrosion. Plus, if the fireplace is located in the basement, it may also help to reduce humidity levels.

    How do I adjust the pilot on gas fireplace?

    Adjusting the Pilot Flame. If the pilot flame is too small, you may be able to make it larger by turning the pilot adjustment screw on the valve control counterclockwise with a screwdriver to open it.

    Begin typing your search term above and press enter to search. Press ESC to cancel.

    Back To Top