How do I pair my Peltor WS headset?

How do I pair my Peltor WS headset?

Pairing

1. Headset fully charged and Powered OFF.
2. Press and hold the Power ON for at least 5 seconds (Centre Button Right Cup).
3. Headset announces that it is in pairing mode.
4. Put the phone into pairing mode.
5. Phone eventually displays Peltor WS5.
6. Select and instruct the phone to pair. ( if phone asks for password use 0000)

Are 3M Peltor Bluetooth?

3M™ Peltor™ WS™ ProTac XP is an active-hearing hearing protector that features Bluetooth® technology. The Bluetooth function enables work with both hands free while taking calls via DECT- or mobile phones.

How do I connect my Peltor WS Litecom?

Pairing Instructions: After powering on the headset, locate the Bluetooth button on the left cup and press it to enter Bluetooth pairing mode when no device is currently paired. You’ll hear a voice message confirming “Bluetooth pairing on” Make sure your device has Bluetooth enabled, and scan for devices.

How do I turn on my Peltor headset?

On and off: Press the + or – button and hold for at least 3 seconds. Increase volume: Press the + (forward) button. Decrease volume: Press the – (rear) button. Volume Boost Mode: Press and Hold + button for 10 seconds, headset will restart at higher gain.

How do I connect my iPhone to 3M headphones?

How Do I Make My 3M Worktunes Discoverable and Connect to My iPhone?

1. Turn on your Worktunes headset, press the control button found on the left ear cup two times.
2. Once in Bluetooth pairing mode, your phone Bluetooth list should display Worktunes Connect.

How long do peltor batteries last?

Features: Approximately 20 hours of life.

How does peltor ComTac work?

The ComTacs are equipped with an active-volume function which prioritises incoming radio signals over ambient sounds. When this feature is activated, the circuitry automatically reduces ambient sound amplification by about 30DB when an external signal such as a radio transmission is received.

How do you turn Worktunes on?

Turn on your Worktunes headset, press the control button found on the left ear cup two times. Voice assistant will let you know once you are in Bluetooth pairing mode. Once in Bluetooth pairing mode, your phone Bluetooth list should display Worktunes Connect.

What is the 3M Peltor WS plus headset?

The 3M™ PELTOR™ WS™ LiteCom Plus Headset is a next generation protective communication solution. The analog UHF two-way radio enables clear, hands-free communication in high levels of noise. With Bluetooth® multipoint connectivity, the headset can be simultaneously connected to two Bluetooth® enabled devices.

What is the 3M Peltor™ WS™ PROTAC XPI headset?

The 3M™ PELTOR™ WS™ ProTac XPI Headset is a next generation Bluetooth® protective communication solution. With Bluetooth® multipoint connectivity, the headset can be simultaneously connected to two Bluetooth® enabled devices.

Is 3M Peltor made in Canada?

FP3813 rev. b © 3M 2018. All rights reserved. 3M™ PELTOR™ WS™ ALERT™ XP Headset and 3M™ PELTOR™ WS™ ALERT™ XPI Headset are made in Sweden by 3M Svenska AB, SE-331 02, Värnamo, Sweden. 3M, WS and ALERT are trademarks of 3M Company, used under license in Canada. PELTOR is a trademark of 3M Svenska AB, used under license in Canada.

What kind of microphone does 3M Peltor use?

Water and dust-proof noise-cancelling microphone (IP68) for clear speech transmission in noisy and harsh environments The 3M™ PELTOR™ WS™ ProTac XPI Headset integrates hearing protection, Bluetooth® communication, and a noise-cancelling speech microphone to deliver a wireless, hands-free protective communication solution.