How do I reset my endoscope WiFi?

How do I reset my endoscope WiFi?

– Please use a clip to press the reset button for 8 sec until the WiFi indication light flashes and turn off the box. Then, restart the endoscope and re-join its WiFi after the box is fully charged. – Please keep the distance between WiFi box and mobile phone within 10 meters without any obstacles.

How do I connect my wireless endoscope?

Connect the endoscope camera with WIFI transmitter by Micro usb port. 2. Turn on the WiFi transmitter by KEEP PRESSING Round Button for 5 seconds until red light flick. Open phone’s WLAN or wifi setting, find wireless signal named PLX_Camera (PLX camera), click it and input password “12345678″ to connect.

What is Depstech password?

12345678
Just choose the DEPSTECH network and enter the default pass word. Do you find this helpful? You don’t need the SID. Once you select the WiFi for the Scope in your phones WiFi settings, the password is 12345678 and you should be able to see it on your phone unless you changed the password.

How do I use Inskam app?

HOW TO USE IT:

  1. Turn on the WiFi box, it will generate a wifi signal named “Inskam_***** ” .
  2. Go to your phone settings,Turn on the WiFi network,Wait about 5 seconds.
  3. Open the pre installed “Inskam” App on your device to use the camera (View the live videos).

How do you use Depstech?

You simply download the Depstech app on to any smartphone. Turn on the Depstech unit, go into your settings on the smartphone and go to the WIFI settings. Wait a moment and the hotspot name will appear (the name is clearly listed in the instructions) and you connect to that.

How do I connect my iPhone to my WiFi endoscope?

You need to go to settings on iPhone, choose WiFi, then wait a moment until Jetion comes up. Click on that like it is a WiFi connection and once it connects you will have the camera on your phone screen. You will no longer be on your local WiFi but using the camera through WiFi to connect.

How do you use a HD scope?

Click on the setting icon on main interface of smart mobile device; 2). Click on the “Wi-Fi/WLAN”, click “HD Scope-XXX” and it will connect automatically. 3). After the connection is successful, click on HD Scope app to view real time video.

How do I connect to Depstech?

You simply download the Depstech app on to any smartphone. Turn on the Depstech unit, go into your settings on the smartphone and go to the WIFI settings. Wait a moment and the hotspot name will appear (the name is clearly listed in the instructions) and you connect to that. Then open the app you downloaded and voila!!

How do I set up inskam?

What is inskam app?

inskam is a software that interacts with devices via mobile phones. 1.Client supports photo and video recording. 2.Can preview photos and videos. ***Please note before downloading*** Due to Google’s own negligence, the Android 10 system cannot recognize the USB camera.

How do I find the wifi password of my endoscope?

I ran into this same issue with a similar endoscope and did a writeup of how I figured out the WiFi password, the telnet account and password, and how to configure the endoscope by sending some UDP packets. The short answer is that you’ll need to connect to the TX2 and RX2 serial debug ports at 57600 baud, it will print out your WiFi password.

How to connect the endoscope to the mobile device?

Turn on the wireless transmitter, plug the endoscope into endoscope input. 1). Click on the setting icon on main interface of smart mobile device; 2). Click on the “Wi-Fi/WLAN”, click “HD Scope-XXX” and it will connect automatically. 3). After the connection is successful, click on HD Scope app to view real time video.

Is it possible to wipe the password from the SPI flash?

Password will be in the SPI flash, yes. But likely holding down the reset button for a while will get it to wipe the writable overlay partition and revert to the underlying read only state – typically that’s a jffs2 near the end that mounts over the top of a squashfs filling the middle of the chip.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top