How do you unjam a Fellowes 60cs shredder?

How do you unjam a Fellowes 60cs shredder?

This is typically located on the top of the shredder.

1. Set the switch to reverse mode or press and hold the reverse button for 2-3 seconds allowing the machine to work the jammed paper out.
2. As the shredder is reversing, gently pull the uncut portion of the paper from the machine.
3. Resume shredding once the jam is cleared.

How do you get stuck paper out of a shredder?

What if my shredder paper jam cannot fix itself?

1. Unplug your shredder.
2. Remove the top shredding section.
3. Use a pair of tweezers to remove all jammed strands of paper from the blades.
4. Cut all curled pieces of paper.
5. If plastic is causing the jam, use a screwdriver to clear the block.
6. Use shredder oil to lubricate the blades.

What does the red light mean on a Fellowes paper shredder?

Yes, the RED LIGHT comes on when you separate the SHREDDING HEAD from the bucket. When you put the SHREDDING HEAD back into place after emptying the bucket, the RED LIGHT goes off. If you shredder is not shredding, is there a chance that you have overheated the unit.

What oil can I use to lubricate my shredder?

Use only vegetable-based oils like Fellowes Shredder Oil for all cross-cut paper shredders. Also use High Security Shredder Oil for large capacity paper shredders and Fellowes commercial shredders with the Auto-Oil feature.

Is there a user manual for the Fellowes powershred 60cs cross-cut shredder?

User manual for the Fellowes Powershred 60Cs Cross-Cut Shredder contain basic instructions that need to be followed during installation and operation. Before starting your appliance, the user manual should be read through carefully. Follow all the safety instructions and warnings, and be guided by the given recommendations.

How many sheets per pass is a Fellowes safesense Shredder?

10 sheets per pass. Fellowes SafeSense®shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity. ENGLISH Model 60Cs

What are the specs of a 60cs Shredder?

Fellowes 60CS Specs Shred Type Cross-Cut Sheet Shred Capacity 10 per pass Shred Size 0.16 x 2″ (3.96 x 50.8 mm) Throat Width 9″ (22.9 cm) Wastebin Capacity 6 gallons (22.7 liters)

What is the operating temperature of a safesense Shredder?

Fellowes SafeSense®shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity. ENGLISH Model 60Cs IMPORTANTSAFETY INSTRUCTIONS — Read Before Using! 15