How do you use a Polycom remote?

How do you use a Polycom remote?

To pair the remote control with Polycom Studio: Long press the Remote Control Pairing button on the bottom of the USB video bar until the LEDs blink blue in the middle with a notification sound. Long press Mute on the remote control until you hear a notification sound.

How do I control my Polycom camera?

To move the camera to a stored preset: 1 If a call is connected, press Near or Far on the remote control , and then choose a near-site or far-site camera. 2 Press a number on the remote control. Depending on how your system is configured, you might need to press Preset before you press a number.

How do I wake up my Polycom?

Press any button on the remote control or pick up the remote control to wake up the system if it is asleep. sensitive, you can touch your finger on or close to the sensor. The Polycom splash screen is displayed within several seconds.

What is SIP in Polycom?

If your network supports the Session Initiation Protocol (SIP), you can use SIP to connect IP calls. The SIP protocol has been widely adapted for voice over IP communications and basic video conferencing; however, many of the video conferencing capabilities are not yet standardized.

How do I create a Polycom meeting?

Select Personal Forms Library from the Look In list. Select Polycom Video/Audio Meeting and click Open. Make sure Polycom Video/Audio Meeting is selected in the When posting to this folder field and then click OK.

What is Polycom VTC?

The Polycom is an easy to use video conferencing system which delivers full motion HD video and high quality audio. The Polycom is fully standards-based and can connect to any other standard-based video conferencing systems around the world.

How does a Polycom work?

A conference phone is usually placed in the middle of the room in which the conference call participants are located. This means that good call quality is guaranteed to all persons present during the conference call. The Polycom SoundStation is a conference phone for medium-sized rooms.

How do I connect my Polycom to my speakers?

Plug power unit into an electrical outlet. Plug the short cable into an “active” ANALOG (single line) jack. Plug the long cable into the bottom of the Polycom set. To place a call, press the ON/OFF switch, wait for dial tone, and then dial the number.

What is Polycom provisioning server?

Answer: A provisioning server is a term for a server like FTP, FTPs, HTTP, HTTPs or TFTP hosting the relevant files => here <= for a Polycom device to successfully be able to download configuration and provide software.

What does open SIP mean?

Simply put, a SIP Phone is a phone that uses the Open Standard “SIP” to set up and manage phone calls. Since these protocols are generically termed “VoIP” (voice-over-internet-protocol), these phones are also sometimes called VoIP Phones or VoIP Clients.

How does Polycom work?

A conference phone is usually placed in the middle of the room in which the conference call participants are located. The Polycom SoundStation is a conference phone for medium-sized rooms. The Polycom HD Voice technology ensures that all voices are captured and reproduced in very high quality.

What is the Polycom VVX business media phones user guide?

Before You Begin This Polycom VVX Business Media Phones User Guideuses a number of conventions that help you to understand information and perform tasks. See the Polycom VVX Business Media Phones Regulatory Noticesguide for all regulatory and safety guidance. Who Should Read this Guide?

What is the Polycom RealPresence user guide?

The purpose of this user guide is to facilitate the use of the Polycom RealPresence Desktop and Polycom RealPresence Mobile VTC application for NATO Public Access VTC Users working on personal devicesalso known as Remote users. Required Software

How do I contact Polycom technical support?

To contact Polycom Technical Support, go to Enter the following information about your RealPresence group system, then ask a question or describe the problem. This information helps us to respond faster to your issue: In addition, please provide any diagnostic tests or troubleshooting steps that you have already tried.

What is the latest user information for the Polycom HDX system?

The latest user information about vers ion 3.0.5 of the Polycom HDX System software, version 1.5.0 of the Polycom Touch Control Operating System software, and version 1.5.0 of the Poly com Touch Control Panel software is provided in this guide. This guide covers instructions for the Polycom HDX room systems with the Polycom Touch Control.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top