How long is a M35A2?
An M35A2 cargo truck with winch is 112 inches (2.8 m) tall, 96 inches (2.4 m) wide and 277 inches (7.0 m) long, and 13,030 lbs (5,910 kg) empty (13,530 lbs (6,140 kg) empty when equipped with the front mount winch, according to dashboard dataplates).
Who made M35A2?
M35 series 2½-ton 6×6 cargo truck
| Truck, Cargo, 2½-ton, 6×6, M35 | |
|---|---|
| Designer | REO |
| Designed | 1944 |
| Manufacturer | REO, Kaiser, Studebaker, AM General, Kia and Ssangyong (South Korea only), Bombardier (Canada only) |
| Produced | 1950–1988 (M35A1, M35A2) 1993–1999 (M35A3) |
Why is it called deuce and a half?
A few years later, the M35 inherited the nickname “Deuce and a Half” from the GMC CCKW military truck that was designed in 1944 and widely used during World War II. Eventually, the M35 became synonymous with the “Deuce and a Half” due to it’s 2 ½ ton capacity rating and a wide range of carrying abilities.
What replaced the deuce and a half?
FMTVs first entered production in 1991 to replace the iconic 2.5-ton “deuce and a half” and 5-ton trucks. Since then, multiple vendors have produced, upgraded, and improved more than 75,000 of these vehicles.
What replaced the M35 truck?
GMC M135
GMC M135. An evolution from their widely successful CCKW, General Motors’ successor “Deuce and a Half” 21⁄2-ton M135 was classed as a substitute standard in the US Army after the REO M35 was standardized, and thus was employed in much smaller numbers, but the M135 was also widely used by the Canadian Army.
What trucks were used in ww2?
1940
| Name and type | Build years | Notes |
|---|---|---|
| Mack NM 6-ton 6×6 | 1940-1944 | Prime mover cargo truck |
| Mack NO 71⁄2-ton 6×6 | 1943-1945 | Prime mover cargo truck |
| M1 Wrecker 10-ton 6×6 | 1941-1945 | Standard heavy wrecker during WWII Built by Ward LaFrance and Kenworth. |
| Diamond T 980 12-ton 6×4 | 1941-1945 | Tractor for M19 Tank Transporter |
What is a multifuel diesel engine?
Multifuel, sometimes spelled multi-fuel, is any type of engine, boiler, or heater or other fuel-burning device which is designed to burn multiple types of fuels in its operation. Multifuel engines sometimes have switch settings that are set manually to take different octanes, or types, of fuel.
What is a M35A2?
Its a M35A2 that has been cut down and made into a 4×4 with a trailer bed used as the truck bed. Have you seen David Doyle’s excellent article on “Decoding your Deuce” in Military Vehicles Magazine?
What kind of truck is a M35A2 dump truck?
M35A2 DUMP TRUCK – EXCELLENT CONDITION, TURBO DIESEL, ALL WHEEL DRIVE, AIR SHIFT TRANSFER CASE, ELECTRIC/HYDRAULIC DUMP HOIST RUN OFF OF REMOTE 12 VOLT SYSTEM, GOOD More Info Military Trucks – 617.
What are the dimensions of a M35A2 winch?
Dimensions An M35A2 cargo truck with a 10,000 pounds (4,500 kg) PTO-driven Garwood front winch is 112 inches (2.8 m) tall, 96 inches (2.4 m) wide and 277 inches (7.0 m) long, and 13,030 pounds (5,910 kg) empty (13,530 pounds (6,140 kg) empty when equipped with the front mount winch, according to dashboard dataplates).
Can a M35A2 be cut down and turned into a 4×4?
Here is a very interesting concept that was on the internet that I saw. Its a M35A2 that has been cut down and made into a 4×4 with a trailer bed used as the truck bed. Have you seen David Doyle’s excellent article on “Decoding your Deuce” in Military Vehicles Magazine?