How much does an electric snake cost?

How much does an electric snake cost?

A machine-powered plumbing snake costs $250 to $1,000 on average and reaches 50 to 75 feet for most residential blockages….How Much Is A Plumbing Snake?

Size Average Cost
Machine Auger (50′ – 75′) $250 – $1,000
Heavy-Duty Sewer Machine $1,000 – $3,500

What is the difference between a drain snake and an auger?

Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.

Does drain snake work?

Snakes work well for small drains like the kitchen or bathroom sink. Augers work well for larger pipes like your toilet or shower drain. Pipes larger than 4 inches don’t typically clog, but if they do, they usually require replacement or the use of a mechanical auger.

How do you clean a drained snake after use?

With a high-bristle wire pipe brush, poke through the plumbing snake’s crevices, dislodging any remaining particulate that the scrubbing brush was unable to reach. Then, run the plumbing snake through clean water to ensure that the coil is clean. Wipe it down with a rag and leave it out to dry completely.

How do you get a drain snake out of a bend?

The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.

Is Drano bad for pipes?

Drano® will not damage pipes or plumbing. Drano® products are powerful enough to dissolve nasty clogs, but they will not harm your plastic or metal pipes, so there’s no need to worry. All Drano® products are safe and can be used with plastic pipes or metal pipes.

What does a drain auger look like?

Drain augers are a long tool that looks like a snake. They can be fed down a drain or toilet to remove a blockage. Drain snakes have a rubber shield to protect drains and toilets from scratches, unlike most other snakes. This tool is excellent for bathroom drains including showers, bathtubs, and toilets.

What is a drain snake used for?

Drain Snake. A standard household drain snake sometimes called a drum snake or top snake​ is the smallest of the drain-clearing augers. It is primarily used for clogs in tubs, showers, bathroom sinks, washing machines, and sometimes kitchens sinks.

How to use a drain snake?

You use a drain snake by feeding the end into the drain and pushing it through the drain line while turning a handle to keep the cable spinning inside the pipe. Since the snake is flexible it can bend around the twists and turns of the drain pipe without getting stuck, moving forward until it reaches the obstruction in the line.

What is an electric drain snake?

Essentially, the electric drain snake is a cutter that has spinning blades at the end of a long steel cable. It is used by inserting the cutter and cable into a water line or sewer that has been blocked.

What is a drain snake?

A drain snake, also called a plumbing snake or drain auger, is a device used to unclog drains. It has a long, flexible metal cable with a corkscrew auger attached to the end.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top