How much Hydroban do I need?
For most applications, apply a 6 mil coat of HYDRO BAN Quick Cure liquid with brush or roller over substrate including pre-treated areas. Flash membrane up over pre-treated coves and corners, so such areas have two layers of HYDRO BAN Quick Cure liquid. Let dry 15 to 20 minutes at 70°F (21°C) and 50% RH.
What is the difference between Hydro Ban and hydro barrier?
The key difference is Hydro Barrier requires fabric to be used in all the corners and seams while Hydro Ban does not. There is also a color difference – Hydro Ban is sage color and will dry to an olive green color while Hydro Barrier is a light blue and will dry to a dark blue color.
Is Hydro Ban better than redguard?
One major difference if you do your research online is that Redgard is certified for use in steam rooms and as a vapor barrier whereas Hydro-ban is not. Both have the certification for pan liners and waterproofing, but Redgard outperforms Kerdi membrane (not Kerdi DS) in Perms of vapor penetration.
Can you paint over Hydro barrier?
Yes you can, but if the hydroban is applied roughly the paint will show it.
How long does laticrete take to dry?
New Concrete – minimum 14 day cure time at 70°F (21°C) and NOTE below. Latex mortar beds – allow a full 72 hour minimum cure time at 70°F (21°C) and NOTE below. Leveling or patching materials – allow a full 72 hour mimimum cure time at 70°F (21°C) and NOTE below.
What is Hydroban made of?
HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.
What is laticrete used for?
The ultimate, lightweight one-step, polymer fortified, Large and Heavy Tile mortar for interior and exterior installation of ceramic tile, porcelain tile, glass tile, stone, quarry tile, pavers and brick.
Can I use hydro ban on plywood?
HYDRO BAN bonds directly to a wide variety of substrates. Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored at temperatures >32°F (0°C) and <110°F (43°C). DO NOT bond to OSB, particle board, interior glue plywood, luan, Masonite® or hardwood surfaces.
Do you have to Red Guard shower?
As long as it’s Cement Board & not some crappy “almost” cement board stuff. You really don’t need the RedGard, but the more protection the better…so go for it. And yes, you can do the boards beforehand. But, hit the filled seams & screws (your weak points) as soon as a panel is ready to give it some time to setup.
What is Hydro barrier used for?
HYDRO BARRIER can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.
Can you paint over Redgard waterproofing?
Final verdict: Can I paint over Redgard? Painting your waterproof membrane may not be warrantied, but it is possible. Remember that you will have to use a good quality primer or an all-in-one paint for the best chance at success with your fresh coat of paint.