Is the Ford 427 an FE block?

Is the Ford 427 an FE block?

Ford FE engine blocks used for performance builds are generally selected from one of three groupings: 390, 428, and 427. While other blocks are out there, these three are the foundation for the vast majority of high-performance street and track applications.

How much is a 427 Ford engine worth?

Reproduction 427 SOHC engines are selling for $35,000 to $40,000.

How much horsepower does a Ford 427 make?

Specifications. The Ford 427 Cammer produced 616 horsepower with single four-barrel carburetor and 657 horsepower with dual four-barrel carburetors. This made the engine one of the most powerful engines to come out of Detroit during the octane-fueled 1960s.

What does FE stand for on Ford engines?

FE (which means “Ford Engine,” not Ford-Edsel, nor Ford Engineering) variety comes from a broad selection of bore and stroke sizes to achieve cubic-inch displacements. The 332 and 352 are fraternal twins, virtually identical engines with 4.00-inch bores.

How much is a 427 side oiler?

And of course, the 427 could be found in Carroll Shelby’s 427 S/C Cobras, but not all of them interestingly. The side-oiler was expensive, about $800 at the time, so many of these Cobras were fitted with the 428 Police Interceptor engine instead.

Why is the Ford 427 called a side oiler?

In the standard 427 engine, now dubbed the top-oiler or center-oiler, oil was pumped to a passage under the camshaft and up to the valve train before oiling the crank. This new oil passage from the side of the block resulted in its new moniker, the side-oiler.

Did the GT40 have a 427 side-oiler?

The Ford Single Overhead Cam (SOHC) 427 V8 engine, familiarly known as the “Cammer” was released in 1964 to maintain NASCAR dominance and to counter the Chrysler 426 Hemi engine. The engine was based on the high performance 427 side-oiler block, providing race-proven durability.

What is a 427 FE engine?

The 427 side-oiler engine belongs to the Ford FE family, arguably the peak of Ford’s big cubic inch V8s. The FE was available from 1958 to ’76 in displacements from 330 to 428 cubic inches. While it was second in displacement to the 428, the 427 was first in performance and the only ‘race-only’ engine in the FE family.

What did the Ford 427 come in?

What Models Ran the Ford 427 Engine? The 1963 Ford Galaxie, the 1967 Ford Fairlane, the 1965 Cobra Mark III, the 1965 Ford Thunderbird, and the 1968 Ford Torino are just a few. It was also found under the hood of the F100 and many school buses.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top