What does F13 mean on dishwasher?

What does F13 mean on dishwasher?

If your dishwasher is beaming at you with an F13 error code on the control panel display, it is likely to be a fault with the water softener or the hardness of the water in the machine.

How do you drain a dishwasher?

How to Drain Your Dishwasher

  1. Step 1: Prepare Your Dishwasher.
  2. Step 2: Make Sure Your Dishwasher is Turned Off.
  3. Step 3: Remove the Stagnant Water With a Towel.
  4. Step 4: Perform a Check On the Drain Hose.
  5. Step 5: Remove Drain Hose and Clean.
  6. Step 6: Check Dishwasher Drain.

How do I fix error code F13 on Miele dishwasher?

Check the drain hose and drainage for blockages and clean. Miele Dishwasher Error Code = The display shows fault code F12 or F13 (Water intake). Cause Of Error/Fault Code = Stopcock is closed.

Why is the tap symbol flashing on my dishwasher?

The supply hose may be kinked. Check that there are no kinks in the cold water fill hose and the waste water hose by pulling the appliance out slightly and untwisting any visable kinks or bends in these hoses. Pull the appliance out slightly and untwist any visible kinks.

What does F78 mean on Miele dishwasher?

circulation pump
Miele Tech Support say F78 means a fault with the circulation pump. Did some initial checks – it looks like the water is draining out without problems and fresh water is coming in too. The filter is clean, and there appears to be no blockage in the circulation pump (I can move it easily by hand).

How do I fix F13 error on Whirlpool?

Whirlpool error F13 or F22 First, check if the door of the washing machine is closed properly before you start it. A buildup of soap, dust, or an overloaded drum may cause the door to not close properly. Wipe the door lock clean with a wet towel or remove some clothes from the drum. Try to start the wash cycle again.

What causes a dishwasher not to drain?

It is quite common for a dishwasher to not drain because either the drain hose or the air gap (if the unit has one) is clogged up. Drain hose clogs commonly occur where the hose is attached to the main household drain line, or where the hose connects with the garbage disposer.

How do you clear error codes on Miele dishwasher?

To delete the fault code memory, press and hold the Program button until the “Intake/Drain” LED lights up. Then press and hold the Program button until the “SaniWash” LED goes out. off: No faults stored.

What does F14 mean on a Miele dishwasher?

F14 code Miele Dishwasher. F14 – “level/pressure switch failure.” The level switch monitors the dishwasher’s water pressure during the heating cycle (main wash). Level switch failure can commonly happen from poor circulation, or from the defective level switch, itself.

Where is the water tap on a dishwasher?

The water valve to the dishwasher is usually located under the sink. There may be several valves under the sink, but the dishwasher valve should be on a pipe or hose going through the cabinet into the dishwasher. To make sure the valve is open: Turn the handle counter-clockwise (to the left).

How do Belling dishwasher repairs in London work?

We offer fixed price Belling Dishwasher Repairs in London. Any time that the float chamber micro switch operates for more than 2 secs the control board will shut down all functions and operate the drain pump for 30 secs and then sound the alarm buzzer for 30 secs and the control panel displays E4.

What is the warranty on a Belling dishwasher?

No warranty is inferred, implied or given. You also have to know that these Belling dishwasher fault or error codes are not a “magic bullet”, they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for old fashioned diagnostic skills.

Why choose an integrated dishwasher from betterbelling?

Belling’s integrated dishwashers fit seamlessly into your kitchen design and deliver fantastic results every time. They also boast A++ energy ratings that help to keep your water and electricity bills low, and clever features that make cleaning up quicker and easier.

What does E6 mean on a Whirlpool dishwasher?

If after the control board has carried out an internal test and found the thermister open circuit the dishwasher will cease all functions and the alarm buzzer will sound for 30 secs and the control panel will display E6 after a further 3 mins the machine will operate the drain pump for 90 secs and revert to rest position.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top