What is 65-45-12 ductile iron?
Cast Iron 65-45-12 Dura-bar is a ductile iron grade offering high wear resistance, strength, durability, ductility, with excellent consistency, impact resistance, machinability, and finish. Tensile and Yield Strength are comparably strong to 1040 steel in the “as-rolled” condition.
What is A536 material?
Ductile Iron ASTM A536 ASTM A536 65-45-12 is a nodular Iron with a ferritic and pearlitic microstructure and mechanical properties comparable to low alloy steels. Ductile iron 65-45-12 is one grade in a family of many. Chemistry requirements are not specified in the ASTM A536 standard.
What is the density of ductile iron?
An Introduction to Ductile Iron
|Property||Minimum Value (S.I.)||Maximum Value (S.I.)|
What is ASTM A395?
ASTM-A395 › Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures.
What is ASTM A27?
ASTM A27 is a specification developed for carbon steel castings for general applications. Often referred to as mild steel, or plain carbon steel, the balance of cost vs. ASTM A27 includes carbon steel castings for applications requiring up to 70 ksi (485 MPa) minimum tensile strength.
What is the density for copper?
8.96 g/cm³ (Near room temperature)Near room temperature
Is iron malleable or ductile?
Advantages and Disadvantages. Gray cast iron has a high dampening capacity and is corrosion resistant. However it is brittle, and can be difficult to machine as it is hard to produce a smooth surface and can reduce tool life. Malleable iron has good shock resistance, is ductile and is very machinable.
What is ASTM grade 65-45-12 cast iron?
ASTM grade 65-45-12 is ductile cast iron in the as-fabricated (no temper or treatment) condition. 65-45-12 is the ASTM designation for this material. 450-10 is the ISO numeric designation. D4512 is the SAE designation. Additionally, the UNS number is F33100.
What is the difference between 65-45-12 and 450-10 cast iron?
ASTM grade 65-45-12 is ductile cast iron in the as-fabricated (no temper or treatment) condition. 65-45-12 is the ASTM designation for this material. 450-10 is the ISO numeric designation. D4512 is the SAE designation.
What is 4512 grade of iron?
Grade 4512 is ferritic ductile iron supplied either as-cast or heat-treated. The matrix is predominantly ferrite, but this grade can contain pearlite, depending on section size. This material data has been provided by SAE.
What is the density of the most dense metal?
For example, the most dense metal is Osmium (Os), with a density of 22.59 g/cm3, which is 42 times that of the least dense metal Lithium (0.534g/cm3).