What is mobil dte 24 used for?
It is designed to provide excellent antiwear protection, outstanding oxidation resistance and keep clean performance allowing extension of oil and filter change intervals.
Is Mobil DTE 24 food grade?
Product Description The lubricants are tasteless, odourless, premium quality lubricants formulated with non-toxic NSF/FDA food grade additives and base oils. The additive system provides good wear protection, excellent oxidation stability and protection against rust.
What is DTE 24 equivalent?
Hydraulic Oil/ Mobil DTE 24/ ISO 32/SAE 10/Or Equivalent such as Rando HD 32/Per 5 Gallon Pail.
What is the difference between DTE 24 and DTE 26?
Mobil DTE 24 is an ISO Grade 32 hydraulic oil. Mobil DTE 26 is an ISO Grade 68 hydraulic oil.
Is Mobil DTE 25 food grade?
For use in food-processing and preparation areas, this oil is NSF registered H1 or meets FDA 21 CFR 178. 3570 for incidental food contact. It has wear-resistant properties to keep hydraulic pumps and equipment working, even in high-pressure systems.
What is the viscosity of DTE 26?
68
Developed in conjunction with major builders, Mobil DTE 26 is a super-premium ISO Viscosity Grade (VG) 68 antiwear hydraulic oil.
What is ISO 22 hydraulic oil?
Hydraulic 22 is part of Crown Oil’s range of premium-grade mineral-based hydraulic oils with good anti-wear properties providing protection in the most demanding of systems while still meeting ISO standards for hydraulic oil. This hydraulic fluid is rust, corrosion and oxidation inhibited.
Which oil is used in hydraulic?
Today most hydraulic fluids are based on mineral oil base stocks. Natural oils such as rapeseed (also called canola oil) are used as base stocks for fluids where biodegradability and renewable sources are considered important.
What viscosity is DTE 25?
Properties and Specifications
| Property | MOBIL DTE 21 | MOBIL DTE 25 |
|---|---|---|
| Foam, Sequence III, Tendency, ml, ASTM D892 | 20 | 20 |
| Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 2.7 | 6.7 |
| Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 | 10 | 44.2 |
| Pour Point, °C, ASTM D97 | -30 | -27 |