What is the hazmat symbol for gasoline?

What is the hazmat symbol for gasoline?

Red is for flammable goods like gasoline, rubbing alcohol, paint and acetone, which can fall into Classes 2 or 3. These placards feature a flame image and usually have the words flammable, gasoline, combustible or fuel oil.

Where are NFPA 704 placards required?

NFPA 704 Placards are required for any business or commercial building that has a quantity of hazardous materials equal to or greater than a total weight of 500 pounds solid, 55 gallons liquid, 200 cubic feet of gas or where a radioactive product is used, stored or handled.

Is gasoline a hazmat?

Guidance: Gasoline is a listed hazardous material in the table found at 49 CFR 172.101.

Is NFPA mandatory?

In most cases, compliance with NFPA standards is voluntary. However, in some cases, federal or state Occupational Safety and Health (OSHA) agencies have incorporated wording from NFPA standards into regulations. In these cases, complying with the standards is mandatory.

Can I ship gasoline?

All flammable liquids having a flashpoint of 20° F (–7° C) or below are prohibited from mailing. Gasoline (UN1203) is a flammable liquid that normally has a flashpoint of –50° F. Gasoline is nonmailable under any circumstances.

Is gasoline a flammable liquid?

Gasoline is termed Flammable because of its Low Flashpoint and High Vapor Density. Kerosene and Diesel Fuel are termed Combustible because their Flashpoint is greater than 100 degrees F. Gasoline produces ignitable vapors that are 3 to 4 times heavier than air and can travel for great distances along the ground.

What does placard 1202 mean?

4-digit D.O.T. placards indicate specific hazardous materials. Each Placard includes a 4-digit UN number, corresponding hazard class graphic, and hazard classification number.

What to know about NFPA 704 signs?

There are three symbols approved by the NFPA 704 system: W – The W symbol indicates that the chemical being labeled has a strong reaction to water. OX – This symbol indicates that the chemical will have a violent reaction if exposed to oxygen. SA – SA is a symbol for simple asphyxiate gases.

What do the areas of the NFPA 704 markings indicate?

The National Fire Association (NFPA) has developed a color-coded number system called NFPA 704. The system uses a color-coded diamond with four quadrants in which numbers are used in the upper three quadrants to signal the degree of health hazard (blue), flammability hazard (red), and reactivity hazard (yellow).

What is the NFPA 704 fire diamond?

The “Fire Diamond” or “NFPA 704” refers to signs posted at locations that contain hazardous materials . The purpose of the signs are to alert emergency personnel to the risks posed by the materials.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top