What is W bearing?

What is W bearing?

“W” Type: One piece steel crown. Mainly used in very small bearings. This type of cage is inner ring guided. Material is type 410 stainless steel. The cage snaps in from one side over the balls.

How do you read a bearing part number?

The first digit indicates the width or height series (dimensions B, T or H). The second digit identifies the diameter series (dimension D). The last two digits of the basic designation identify the size code of the bearing bore. The size code multiplied by 5 gives the bore diameter (d) in mm.

What is cylindrical load?

Cylindrical Load Cells are characterized by their cylindrical shape, and can be produced in many different dimensions. Both tension and compression load cells are available.

What is cylinder roller?

A common type of rolling bearing is the cylindrical roller bearing, which, as their name implies, uses cylinders to reduce friction between moving parts. There are many types and sizes of cylindrical roller bearings including tapered, needle and spherical. Most of these are single row bearings with a cage.

What does E mean in SKF bearing?

E. Optimized internal design for increased load carrying capacity. 213, 222 and 223 series: Flangeless inner ring and two stamped steel cages. Annular groove and three lubrication holes in the outer ring. d ≤ 65 mm: Guide ring centred on the inner ring.

What is ZZ in bearing?

Type 2 Z or ZZ is a non-removable, non-contact bearing closure with a metal seal on both sides. This type of seal doesn’t make contact with the inner ring therefore, there would be no impact on the operational speed.

How do you read a bearing?

The bearing of a point is the number of degrees in the angle measured in a clockwise direction from the north line to the line joining the centre of the compass with the point. A bearing is used to represent the direction of one point relative to another point. For example, the bearing of A from B is 065º.