What lug pattern is a Porsche 944?

What lug pattern is a Porsche 944?

The first important measurement on Porsche wheels is the bolt-pattern. It’s 5x130mm which means that no other wheels from any other make of cars out there will ever fit on a Porsche.

How do you calculate perfect wheel fitment?

Put simply, to find if your wheels will fit your car, measure the distance from your wheel’s center point to where it is mounted. This is the offset. Add that to half your wheel’s width to find the back space and subtract it to find the front space. Compare this to your wheel well to see if it fits.

Is a 944 fast?

Top speed was stated by Porsche to be 162mph (261km/hr). These performance figures made the Porsche 944 Turbo S the fastest four cylinder production car of that period.

Is 944 hard to work on?

For the most part, not a bad car to work on. The 944 non-turbo engine is readily accesible and the 944 is a pretty simple 8 valve design. Other models would be a lot more difficult – Turbo, S and S2. The turbos have a lot of extra plumbing making access a little more difficult.

What is a 5×130 bolt pattern?

The 5×130 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (130), the notional circle determined by the center position of the studs. The 5×130 bolt pattern is common to Audi, Bentley, Bugatti, Citroën, Fiat, Fisker and LDV vehicles.

How do I get poke fitments?

Poke fitment is when you have wider wheels on the back, sticking out of your rear panels. The right setup will look good in some cars and will achieve an aggressive look but only if you are able to achieve the right setup. A smaller off-set wheel setup with stretch tires is often used to get the poke fitment.

Is the Porsche 944 a real Porsche?

The Porsche 944 is a sports car manufactured by German automobile manufacturer Porsche from 1982 until 1991. A front-engine, rear-wheel drive mid-level model based on the 924 platform, the 944 was available in coupé or cabriolet body styles, with either naturally aspirated or turbocharged engines.

Who makes Porsche 944 engine?

The 944 also featured a 2.5-litre in-line four-cylinder engine developed by Porsche. The 944 was therefore viewed as a “true” Porsche in the eyes of customers. This transaxle model was also produced by Audi in Neckarsulm.

How many miles can a 944 last?

If well maintained, the unit lasts well over 100k miles; standard maximum boost is 1.7-1.75bar.

What will 5×130 wheels fit?

Bolt pattern 5×130 What cars have a 5×130 bolt pattern?

  • Audi (4) Q7 (2005-2015) RS e-tron GT (2021-2022) RS2 (1994-1996) e-tron GT (2020-2022)
  • Bentley (5)
  • Bugatti (3)
  • Citroën (2)
  • Fiat (1)
  • Fisker (1)
  • LDV (2)
  • Lamborghini (1)

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top