Why does my Brother printer keep saying its not connected?
The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. Once you are able to print, enable your firewall again.
How do I reset my Brother HL 2170W printer?
Make sure that all the LEDs turn off. 4. Press the Go button seven times. Make sure that all the LEDs light up to indicate the network card has been reset to its default settings.
How do I reset my Brother printer driver?
Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.
How do I get my Brother printer back online?
If the printer status is Offline Right-click the icon for your Brother machine > See what’s printing > Printer > Use Printer Offline (remove the checkmark). If Use Printer Offline is greyed out, click Open As Administrator. Enter your administrator password, and then click Yes.
How do I print a configuration page on Brother HL 5370dw?
Hold down Go for 10 seconds. Release Go when the machine prints a Network Configuration page. If you release Go in less than 10 seconds, the machine will print if you have any reprint data. For details on how to print a Printer Settings page, please click here.
How do I get my Brother printer out of error state?
Fixing A Brother In Error State
- ➜ Method 1: Check your cables / network.
- ➜ Method 2: Make sure your printer has ink and paper.
- ➜ Method 3: Restart your printer.
- ➜ Method 4: Update printer drivers.
- ➜ Method 5: Use the Windows troubleshooting tool.
- ➜ Method 6: Reset your print spooler.
How do I fix my Brother printer it won’t print?
Here’re the fixes:
- Check the connection.
- Set your Brother printer as the default device.
- Restart the Print Spooler service.
- Update your printer driver.
- Clear the print queue.
- Check for damaged system files.
- Print from other programs.
- Factory reset your Brother printer.
How do you reset your brother printer?
Method 1: Turn the Brother printer off and then wait for a few minutes. Open your printer’s cover by either lifting it or lifting a lever on the side. Press the “Cancel” and “Print” buttons at the same time on the printer and then press the “+” button. Press the “OK” or “Enter” key to complete the reset option.
How do you factory reset a brother printer?
Plug the power cord from the outlet and get ready to reset. Press and hold the “go” button located on the printer’s control panel. Set the power on without letting go of the “go” button. Wait until the printer is completely powered up. Release “go” button and wait until the light indicators are stable and begins turning off.
How to reset a brother printer?
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
How do you reset brother printer toner?
Turn your printer on and open the toner door. Press the “Clear/Back” button on the printer to access the Reset Menu. Use the arrow keys to scroll through the printer’s toner cartridge reset options. Select the toner that you want to reset and then press “OK.”.