What does F22 mean on a Whirlpool Duet washer?

What does F22 mean on a Whirlpool Duet washer?

front door lock issue
F22 indicates a front door lock issue. Try to following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle.

How do I fix the F error on my Whirlpool washer?

An F/dL error code indicates a problem with the door lock. The error code will pop up when the door fails to lock. The washer will display the error code after six attempts to lock the door. To fix the issue, the door lock assembly needs to be inspected for loose or broken wires and other signs of damage.

What does Error Code F mean on Whirlpool washer?

The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.

What does F28 mean on Whirlpool washer?

An F28 error code is a common problem that means there is a communication problem with the central control unit. This problem is generally solved by essentially rebooting the control unit. Rebooting the control unit is accomplished in less than 10 minutes, even by the novice.

How do I fix the DL on my washing machine?

What can you do yourself?

1. Check the door of the washing machine. Clothes or other foreign matter are probably stuck.
2. Perform a hardware reboot. Turn off the washer for 10 minutes, then turn it on again and select the desired program.
3. Make sure the cover is closed properly.
4. Inspect the elements of the lock.

How do I fix my Whirlpool Duet front load washer?

Troubleshooting Common Duet Washer Problems

1. Unplug the washer for 30 seconds to attempt to reset the Duet washer control.
2. Attempt a Duet Washer Quick Diagnostic Test.
3. Check the power supply at the wall with some other device. If the wall plug has power…
4. Check the Duet Line power filter.
5. Check power at the control.

How do you fix the F 28 code on a Whirlpool Duet washer?

What is code F28 Whirlpool Duet?

How do you wash a whirlpool duet washer?

– Clean the gasket: Spray a rag with mildew cleaner and wipe the gasket, being sure to reach down behind it as well. – Clean the dispensers: Remove the slide-out detergent dispensers and scrub them with soap and water. – Run a “sanitize” cycle: Check the settings on the machine and look for a “sanitize” cycle.

How do you unlock the door of a whirlpool duet washer?

Pull down on the bottom panel and pull it away from the washer. Reach through the open panel and up to the door lock. Find the release ring below the locking mechanism. Pull down on the ring to unlock the door.

Can You reverse door on Whirlpool duet washer?

Duet dryer doors cannot be reversed for the swing. They wil only open one way. Depending on your model of washer the newers ones will allow you to reverse the door swing without a kit. The older units require a kit to reverse the washer door.

What does F2 mean on a whirlpool duet washer?

Whirlpool washing machines use error codes to let people know what has gone wrong when the machine isn’t working properly. The F2 error code on the Whirlpool washer is indicated as F02, and means that the washer is taking too long to drain properly.