What is a combo light switch?
These devices combine two functions. Correctly installed they are just as safe as two individual switches. Combination switches are always installed with through-switch wiring and never with end-line wiring. That means two or three cables enter the box. Shut off power to the circuit before removing the old switch.
How do I separate multiple lights on one switch?
3 Answers
- Get a 2-gang box to replace your existing 1-gang box.
- Get a new switch.
- Remove your existing box and install the 2-gang box in its place.
- Run your supply hot wire to both switches.
- Connect the light/fan hot wire to one switch and the exterior light to the other.
- Join all neutrals and ground wires.
Can 3-way switch be used as single pole?
In order for a 3-way switch to function as a single pole, the wires need to be connected to the common and one of the traveler terminals. It will not work if the wires are connected to the two traveler terminals. 3-way switches can be converted to single pole in several configurations.
How do you wire multiple light switches?
Connect one end of the 6-inch wire to the top terminal of the first switch. Twist the other end together with the black wire from the incoming circuit cable and the black wire from the cable going to the second switch to form a pigtail. Twist a wire cap onto the end of the pigtail .
How to wire a single light switch?
Safety First. Always turn the power off at the breaker before starting any electrical project.
How do multiple light switches work?
Multiple switches on a single light is common for areas such as hallway lights where you have a switch at either end of a hallway. To make it work, you need to wire the switches in parallel, such that when the switches are in the same position the light turns on and when they are in opposite positions the light is off.
Can I use single dimmer switch to control multiple lights?
If you want to dim a light from one switch location, you just simply install your dimmer, but if you want to dim your light from more than one switch location, you just pair the dimmer switch with an accessory dimmer or a companion dimmer (manufactures uses different names for these “extra” dimmers).