What does it mean when the washing machine says F21?

What does it mean when the washing machine says F21?

If your Whirlpool washer is showing an F21 error code, this means that your washer is unable to drain properly. This can be caused by a clogged pipe, a faulty drain pump, or something simpler.

How do I fix my Maytag F21 code?

Possible Causes and Action:

1. Disconnect power to the washer.
2. Turn off both hot and cold water faucets.
3. Make sure the drain hose is free from kinks and obstructions.
4. Clean the drain pump filter.
5. Plugin the washer.
6. Try to restart the machine.

How do I reset my Kenmore Elite he5t washer?

How to Reset a Kenmore Elite HE Washer

1. Press the “Stop” button twice, and then press the “Power” button. Video of the Day.
2. Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
3. Press the “Start” button to complete the reset process and restart the washing machine.

How do I reset the F21 code on my washing machine?

Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”

How do I reset my F21 washer?

Press PAUSE/CANCEL two times to clear the display. Here is what to do when your Whirlpool washer shows F21 error code: 1 – Check the drain hose located at the back of the washer to be sure it is not clogged, bent, or blocked in any way.

How do I clear the error code on my Maytag commercial washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

How do I reset my Kenmore 300 Series washer?

In reference to your Kenmore washer: Most washer’s can be reset like a personal computer. Unplug or turn the circuit breaker off for 30 seconds. Plug the power cord into the wall outlet or turn the breaker back on and wait 30 seconds.

How do you reset a Kenmore Elite he3 dryer?

There is not a reset button. You could have a tripped breaker. The dryer will run with only one of the 120 volt legs of 240 volt power supplied to the dryer.

What does F28 mean on a Kenmore washer?

The F28 error code indicates a communication problem between the central control and the motor control. This simply means the control boards are not talking to each other. This can be a difficult and frustrating problem to diagnose even for a technician.

Why is my Kenmore washing machine not draining?

If the washer won’t drain water the drain pump might be defective. It’s also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump. If the washer won’t drain there might be a clogged pump or hose.