How do you override occupancy sensor?

How do you override occupancy sensor?

One of the quick tricks you can try is to quickly turn the motion sensor ON, OFF, ON to override the motion detection and make the light stay on. To go back to motion detection mode, turn the motion sensor switch off and wait for about 10 seconds, and then turn it on again.

How does an occupancy sensor light switch work?

An occupancy sensor is a kind of motion sensor that will automatically turn on the lights when detecting the presence of a person and automatically turn off the lights when no presence is detected to save energy and provide convenience. An occupancy sensor looks like a light switch with a lens for motion detection.

How are occupancy sensors wired?

Occupancy sensor switch wires each have two black wires, (or one black and one red) and ground (green). One of the black line wires connects to line voltage from the panel, the other black (or red) load wire connects to the light(s). Each black wire can be a line or a load.

What is a ceiling occupancy sensor?

The Passive Infrared (PIR) Technology senses occupancy by detecting the difference between heat emitted from the human body in motion and the background space.

PIR Ceiling Sensor Switch works best in offices,copy rooms,storage closets,small conference rooms,and other common areas where there are high levels of occupant motion.

PIR Ceiling Sensor Switch turns lights On/Off automatically when people enter or leave a room

How to turn on a light switch?

Locate the power outlet that the light switch controls. Often the light switch will control an outlet in bedrooms,and sometimes in other rooms in the house.

Put the light switch in the room into the “Off” position.

Plug the lamp into the power outlet that is controlled by the light switch.

Flip the light switch into the “On” position,then turn the lamp on.

Flip the light switch “Off” and the lamp will also turn off.

What is an infrared occupancy sensor?

Occupancy sensor. An indoor light switch equipped with PIR-based occupancy sensor. An occupancy sensor is an indoor motion detecting devices used to detect the presence of a person to automatically control lights or temperature or ventilation systems. The sensors use infrared, ultrasonic, microwave, or other technology.

What is the occupancy sensor’s range?

What is the occupancy sensor’s range? Optimal Detection – Under 7 feet from fixture Good Detection – 7 feet to 11 feet from fixture Limited Detection – 11 feet to 25 feet from fixture