How do I remove a VLAN from a Cisco switch?

How do I remove a VLAN from a Cisco switch?

To delete the vlan database on a Cisco switch, simply go to the privilege mode and issue the command #delete vlan. dat, reload the switch and all your vlans will be gone.

What is legacy Inter VLAN routing?

Legacy inter-VLAN routing In this method, multiple router interfaces are used, each connecting to a switch port in different VLANs. These interfaces are served as default gateways, which requires additional cabling when the network has to be expanded.

How do I ping using Packet Tracer?

Type the ping command and the IP address for S1, and press Enter. Packet Tracer PC Command Line 1.0 PC> ping 192.168.

How do I delete a VLAN on a Cisco Packet Tracer?

Delete VLAN on Cisco Switch Deleting a VLAN is as simple as assigning the default VLAN 1 to the ports that are part of the VLAN you want to delete, and delete the VLAN. i.e If you want to delete VLAN 192, assign VLAN 1 to the ports 3 through 6, and just delete the VLAN 192.

How do I change the VLAN name in Cisco Packet Tracer?

To name a VLAN on a switch, use the name command in VLAN configuration mode. To set the interface type, use the switchport mode command in interface configuration mode. To set the VLAN when the interface is in access mode, use the switchport access vlan command in interface configuration or template configuration mode.

What is inter VLAN routing Cisco?

Inter-VLAN routing is the process of forwarding network traffic from one VLAN to another VLAN. There are three inter-VLAN routing options: Legacy Inter-VLAN routing: This is a legacy solution. It does not scale well. Router-on-a-Stick: This is an acceptable solution for a small- to medium-sized network.

What are the types of inter VLAN routing?

There are two ways in which inter-VLAN routing can be accomplished.

• Traditional inter-VLAN routing.
• Router-on-a-stick.

How do I change the VLAN name in Packet Tracer?

How do I enable IP routing in Packet Tracer?

To enable IP routing, use the ip routing command in switch configuration mode. To disable IP routing, use the no form of this command. This command has no arguments or keywords. IP routing is disabled.