How do you remove a Delta faucet without screws?
See if you can locate one on the top or side of the handle. If you find one, you can use a flathead screwdriver to remove it. Simply work it into the gap around the button or cap and work it around the button or cap, gently lifting as you go.
How do I remove a stuck Delta shower cartridge?
If the cartridge is stuck, wiggle it up and down while pulling it out. For stubborn cartridges, reattach the handle and use it to pull the cartridge outward while moving the cartridge up and down. A flat-head screwdriver can also be used to pry the cartridge away from the cartridge housing.
How do you remove a faucet handle without a set screw?
You can use an allen wrench (also called an allen key) to remove it. Once you’ve done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.
How do you repair a Delta Faucet?
Remove the stem from the faucet and strip it of the rubber seats and springs using tweezers. Use plumber’s grease to cover the new seats and springs before placing them into the faucet. Use plumber’s grease and cover the ball at the end of the valve stem. Replace the stem and secure it with the nut.
How to replace a Delta Monitor Cartridge?
Gather Material Needed
How do I remove Delta faucets?
To remove a Delta faucet, you need a screwdriver, Allen wrench , medium-size pliers and a small pipe wrench. A Delta faucet is designed with an outer handle, a cartridge assembly and an inner sleeve to ease its removal. First, shut off the valves running to the faucet or close the main water valve.
How do you install Delta Faucet?
The first step when installing a Delta kitchen faucet is to install the spout first. Thread the mounting screws into the mounting nut making sure they are only a few threads in. Put the foam gasket on the spout and push the spout through the desired hole in the sink.