Is Keraflor unmodified thinset?
Is a non-modified mortar the same as a dry-set mortar? Yes, there are several terms used to describe a cement-based tile mortar that does not contain any polymer, such as “unmodified,” “non-modified” and “dry-set” mortar. MAPEI’s Keraflor® does not contain polymer and is considered non-modified.
How much thinset do I need for floor tile?
Thinset & Grout Coverage Info
| FLOOR APPLICATION | WALL APPLICATION | COVERAGE (based on 50lbs bag) |
|---|---|---|
| 4 inch – 12 inch Tile | 4 inch – 12 inch Tile | 75 – 85 Sq Ft |
| 12 inch – 16 inch Tile | 12 inch – 16 inch Tile | 60 – 70 Sq Ft |
| 16 inch or larger | 16 inch or larger | 40 – 50 Sq Ft |
| Tile thicker than 3/8 inch | Tile thicker than 3/8 inch | 40 – 50 Sq Ft |
What is Keraflor?
Keraflor is a dry-set mortar for use in interior/exterior residential and light commercial floor applications.
What is the thinset on top of Ditra?
Schluter-Systems requires the use of Schluter SET™ , ALL-SET™ , FAST-SET™, or an unmodified thin-set mortar meeting the requirements of ANSI A118. 1 to install ceramic. (including porcelain) and stone tile over DITRA and DITRA-XL.
What is the difference between porcelain and ceramic thinset?
In general, porcelain tile is harder than ceramic and offers greater design flexibility. Although both are made from clay and other naturally occurring materials fired in a kiln, the clay used to make porcelain tile is more refined and purified.
How do I calculate how much thinset I need?
Amount of Thinset Needed Divide the square footage of your project by 95 (the maximum coverage of a 50-pound bag of thinset. For example, a 10-by-12-foot room is 120 square feet; divided by 95, the result is 1.26. Round the number up to the next whole number. You’ll need two 50-pound bags for this project.
How many bags of thinset do I need for 200 square feet?
To bond DITRA and DITRA-XL to the substrate: Use one 50 lb. (22.68 kg) bag of mortar per 150 – 200 ft2 (13.9 – 18.6 m2). To bond tile to DITRA, using a 1/4″ x 3/8″ (6 mm x 10 mm) square- or U-notched trowel: Use one 50 lb (22.68 kg) bag of mortar per 40 – 50 ft2 (3.7 – 4.6 m2).
What is dry set mortar?
According to the TCNA, dry-set mortar is Portland cement mixed with sand and additives that impart water-retentivity, and it’s used as a bond coat for setting tile. Dry-set mortar is suitable for thin-bed installations of ceramic and natural stone tiles over a variety of surfaces.
Do you use modified or unmodified thinset with DITRA?
For example, to set DITRA over plywood or OSB, a modified thin-set mortar meeting the requirements of ANSI A118. 11 is used. To set DITRA over concrete or gypsum, Schluter-Systems recommends an unmodified thin-set mortar meeting the requirements of ANSI A118.
How much mortar do I need for DITRA?
What is the size of the thinset coverage?
Thinset Coverage FLOOR APPLICATION WALL APPLICATION TROWEL SIZE (based on largest dimension) COVERAGE (based on 50lbs bag) Mesh Mosaics Mesh Mosaics 3/16 inch V-Notch
Can you use keraflor dry set mortar on marble?
Use the MAPEI Keraflor 50 lb. Dry Set Mortar to install ceramic and porcelain tile, quarry tile, pavers and Saltillo tile. This dry set mortar can be mixed with Keraply (sold separately) to install most types of marble, granite and natural stone and covers up to 50 sq. ft.
What is the size of a thinset tile?
Thinset Coverage FLOOR APPLICATION WALL APPLICATION TROWEL SIZE (based on largest dimension) COVERAGE (based on 50lbs bag) Mesh Mosaics Mesh Mosaics 3/16 inch V-Notch 90 – 100 Sq Ft 4 inch – 12 inch Tile 4 inch – 12 inch Tile
Can I mix kerafloor with Isolastic?
When mixing Kerafloor with Isolastic as a substitute for water, the performance characteristics improve, satisfying class C2S2 (improved cementitious highly deformable adhesive) according to EN 12004. Pot life: over 8 hours. Open time: 20 minutes. – floors: 24-36 hours. Set to light foot traffic: approx. 24-36 hours.