What does code F6 mean on Whirlpool washer?

What does code F6 mean on Whirlpool washer?

The F6 error code for this model indicates a drive motor tachometer error. The control board is unable to properly detect the motor speed. You will need to gain access to the MCU (Motor Control Unit), and ohm the motor windings and the tachometer (see images below).

What does F6 mean on my Whirlpool microwave?

The F6 error indicates a relay on the control has failed. You can try to unplug the microwave for a few minutes and then try it again. If the error repeats then the control will have to be replaced.

What does f2e1 mean on a Whirlpool microwave?

There may be a problem with the User Interface / Keypad or the associated wiring. Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Monitor the microwave for one (1) minute to ensure the error code does not display again.

How do I fix error code F06?

1. Reset the Washer. If your Whirlpool washer has an E01/F06 error code, the first thing to try is to reset the washer by disconnecting it from the power for 10 minutes.
2. Access the Washer.
3. Check the Connections.
4. Check the MCU for Damage.
5. Check the CCU for Damage.
6. 6 Reasons Your Samsung Washer Won’t Spin.

What does F6 mean on my stove?

The manufacturer has assigned this error or fault code to indicate that the oven control circuit board is either not getting the proper voltage or is defective. Unplug the appliance for 10 minutes and then plug it back in. If that checks out, you may need to replace the oven control circuit board.

Why is my microwave saying se?

The SE error code on a Samsung microwave means there is a problem with the touchpad or control board. In most cases, the error is caused by a stuck button or a dirty ribbon cable. In more serious cases, the control board may have a fault that can only be fixed by replacing the control board.

How do I fix error code f2e1?

F2-E1 – Touch Pad Cable Unplugged – Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the ‘cancel’ function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

What is a f2e1 error code?

The F2 E1 error code (see images below) means the key tail (ribbon cable for the touchpad) is unplugged or damaged. The tech sheet advises us to check the wiring and connections, and if this does not make the error go away, it then suggests that you replace the keypad.

What does E08 mean on a washing machine?

A common error code on most Hoover washing machines is E08 or Error 8 this usually indicates a problem with the motor, and the most common reason will be that the carbon brushes have worn down and not completing a circuit through the motor, replacement is easy and should be carried out with the machine disconnected …

Why is my Whirlpool washer showing error code F06?

There are several reasons why your Whirlpool washer is showing the error code f06. Seeing this code means that the machine is unable to sense the motor’s speed due to a connection problem between the motor and the Motor Control Unit (MCU).

What does F06 mean on a whirlpool duet washing machine?

The Whirlpool Duet washing machine is an automatic, front-loading washer with automatic sensors for temperature control, water level and wash load size, as well as an electronic control panel and keypads. Errors with the washing machine will result in an error code that appears on the electronic control panel, such as “F06.”.

What does the error code F06 mean on a Kenmore dryer?

The “F06” fault code indicates a drive motor tachometer error. This means the control is unable to properly detect motor speed and the machine will shut down.

What does F06 mean on a Maytag Bravos washing machine?

The “F06” fault code indicates a drive motor tachometer error. This means the control is unable to properly detect motor speed and the machine will shut down. If the failure occurs during high-speed spin, the door will unlock after 3 minutes. Unplug washer or disconnect the power supply.