What is the standard refrigerator opening size?

What is the standard refrigerator opening size?

Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.

How much room do you need to open a fridge door?

You’ll need at least a quarter-inch gap for ventilation on the sides of the refrigerator as well as one inch on the back and top.

How deep is fridge with door open?

The average side-by-side refrigerator is 35 inches wide, 30 inches deep and 71 inches high. With the doors open to 90 degrees, the fridge is 45 inches deep.

What is a standard fridge space in a kitchen?

What is the Standard Fridge Size? There is no actual standard fridge size, however there is a standard fridge cavity that should be allotted as the floor space occupied by the fridge. This makes the standard fridge size smaller than the the typical fridge cavity which is: 1800mm high, 900mm wide, and 600mm deep.

Are kitchen appliances standard sizes?

When it comes to appliances there are standard sizes but there are always exceptions, standard dishwasher is 24″W, although you can find them in 18″W but are usually more expensive. Stoves are usually 30″W, you can get them in 36″W and even as large as 48″W.

What is counter depth vs standard depth?

Counter depth refrigerators are shallower and wider than standard depth refrigerators, with a depth range of 23 to 27 inches. These units usually have French doors or side-by-side doors, with a smaller freezer compartment on the left and a larger refrigerated section on the right.

What is a good size for a refrigerator?

For reference, each adult needs approximately 4 to 6 cubic feet of refrigerator space. That said, industry experts assess that a typical family of four needs at least 20 cubic feet of capacity to house a healthy amount of groceries.

What is the standard fridge size in Australia?

The standard dimensions for a fridge cavity/space in most Australian kitchens is about 90cm wide x 180cm high x 60cm deep − give or take.

How big of an opening do you need for a 36 inch fridge?

A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation.

What is the standard size opening for a refrigerator?

Standard opening for refrigerator is usually 36” wide and standard size of the wall cabinet over refrigerator 36” in width as well. In some cases the cabinet has to be smaller or bigger depending on the fridge size. The heights will vary from 12” to 24” depending on the walls cabinets and how big the refrigerator is.

What is the standard height of a refrigerator cabinet?

The cabinets placed above a fridge are also slightly deeper, typically measuring 24 inches deep. The standard height of an overhead cabinet is 30 inches, but 36-inch or 42-inch tall cabinets are available to allow you to extend the cabinets to the ceiling to maximize storage space.

What is the standard depth of a refrigerator?

A counter depth refrigerator will usually be between 23 and 27 inches (58 to 68 cm) deep, while a standard depth refrigerator is generally between 30 and 34 inches (76 to 86 cm) deep.

What is the average size of a refrigerator?

The average side-by-side refrigerator is 35 inches wide, 30 inches deep and 71 inches high. With the doors open to 90 degrees, the fridge is 45 inches deep.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top