What is lon on router?
The Loytec L-IP Series of routers easily connect LON or BACnet networks to IP networks. Configuration is simple, and is accomplished through a built-in web server or serial port. The LON model supports both Smart Switch and Configured Router modes, and models are available for both FT-10 and XF-1250 physical networks.
What is a LON connection?
LonWorks or Local Operating Network is an open standard (ISO/IEC 14908) for networking platforms specifically created to address the needs of control applications. The platform is built on a protocol created by Echelon Corporation for networking devices over media such as twisted pair, powerlines, fiber optics, and RF.
Is Lon an RS485?
LonWorks™ was Created by Echelon Corp (www.echelon.com) in 1988. LonWorks is a leading networking solution for Building Automation. Where DeviceNet is limited to CAN and Profibus and Modbus are limited to RS485, LonWorks can use twisted pair, Ethernet or even a power line as its communication channel.
What is LON automation?
LonWorks: LonWorks is a communication network protocol useful for building automation applications designed on a low bandwidth, for networking devices through power lines, fiber optics, and other media.
What is ftt10?
The FTT-10A Free Topology Twisted Pair Transceiver provides a simple, cost-effective method of adding a LonWorks transceiver to any Neuron® Chip-based control system. The FTT- 10A transceiver provides automatic detection of the input clock frequency at 5, 10, and 20MHz.
Is LonWorks obsolete?
While many see LonWorks as somewhat outdated, it does still have a dedicated fanbase.
What is LON DDC?
The LON controller is an interoperable, LONMark® compliant controller. The LON controller has factory loaded application specific software which allows optimal control of our water source heat pumps in buildings which require DDC control.
What is the difference between Lon and BACnet?
Unlike BACnet, which is just a protocol that runs on top of other existing electrical standards like RS-485, LonWorks was engineered to be both a data protocol and an electrical standard for digital communications.
What is Lon and BACnet?
Unlike BACnet, which is just a protocol that runs on top of other existing electrical standards like RS-485, LonWorks was engineered to be both a data protocol and an electrical standard for digital communications. …
What is free topology?
Free Topology (FT) is the most cost-effective, highest-performance solution for industrial wired networks compared to alternatives including RS-485 and Ethernet.
Is BACnet dead?
BACnet Is Alive and Well Replacing BACnet with IP would require replacing the existing BACnet wiring with a data network.
Can Modbus communicate with BACnet?
The Anybus BACnet to Modbus gateway allows Modbus devices to communicate on a BACnet network. The gateway works as a translator between the two networks allowing Modbus RTU, ASCII or TCP-devices to show up as individual BACnet-compliant devices on a BACnet/IP network.