How do I reset my H 264 DVR to factory settings?

How do I reset my H 264 DVR to factory settings?

Factory Reset Instructions for iDVR-PRO 960H / HD / H. 264 CCTV DVRs

1. First, make sure that the unit is turned off.
2. Then press and hold any button on the included infrared remote control.
3. While holding the button on the remote, power on the unit.
4. You should hear a single beep followed by a double beep.

How do I set my DVR as default?

Go to your NVR or DVR physically by being in front of it, and using the USB mouse attached to it log into the recorder using the admin account. Right-click on the screen and select “Main Menu”. Select “System” from the Main Menu under Setting. Select “Default” on the left hand column.

How do I reset my analog DVR?

What are the different recording modes on the DVR?

4.2 Record Icon 1) Manual Recording By defaults, manual recording is on ( ) when the DVR is powered on and a HDD is installed. 2) Event Recording When the motion detection or al arm is on, the motion icon ( ) or alarm icon ( ) shows on the screen for any motion or alarm event.

What is the default port number for the DVR?

For example, set HTTP port as 82, need input IP address like 192.168.0.25:82. User name and password here are the same with that used on the DVR. The default is admin and 123456. Notice: Forwarding block may be different in different routers and server, please check your router manual.

How do I connect my camera to my DVR?

2) Connecting to DVR audio input (Optional) Connect the camera audio output to the DVR audio input port with a coaxial cable or RCA cable with BNC connectors. 3) Connecting to power Connect the camera with indicated power supply and make sure it’s power-supplied.

How do I configure the network type of my DVR?

1) NETWORK TYPE Select the network type as STATIC and set all the information needed in the DVR. 2) NETWORK INFORMATION (IP / GATEWAY / NETMASK) Key in all the network information obtained from your ISP (Internet Service Provider).