How much horsepower can a Tremec T56 handle?
This six-speed manual transmission can handle up to 700-ft/lbs. of torque. With befitting modifications, this T56 magnum can handle horsepower of up to 1200.
What are the gear ratios of a T56 transmission?
The gear ratios offered by this transmission do vary depending on the application in which it is used. The first option of gear set is 2.97 in 1st, 2.07 in 2nd, 1.43 in 3rd, 1 in 4th, 0.8 in 5th and 0.62 in 6th, along with a reverse gear ratio of 3.28.
How much torque can T56 handle?
When you start leaning on the T56 harder, however, the edge of its performance envelope begins to show. In its F-car form, it was rated for 450 lb-ft of torque, while the vaunted Viper version was rated at 550 lb-ft.
How much torque can a T56?
Featuring a 700 lb. -ft. maximum torque capacity, the T56 has an exterior case similar to the fourth-generation F-body transmission. The T56 also includes stronger, high-capacity gear sets, input shaft and output shaft used in the TREMEC TR6060.
How much does it cost to build a T56 transmission?
Simply put, a Tremec T56 or TR6060 rebuild starts at $1,899.99, but depends on the vehicle application and level/horsepower rating (see options below).
How much does it cost to rebuild a T56 transmission?
How much does it cost to rebuild a T56, TR-6060, or Magnum? Simply put, a Tremec T56 or TR6060 rebuild starts at $1,899.99, but depends on the vehicle application and level/horsepower rating (see options below).
How much power can a T-5 handle?
My T5 has lasted very reliably behind about 480 ftlb flywheel torque (412 at wheels) with much full throttle use at the strip. Having said that though some people seem to be very ‘hard’ on transmissions and can spit a T5 all over the ground behind a stock 302.
What kind of clutch does a Chevy T-56 have?
The transmission uses a hydraulic clutch, except for the Cobra which was mechanical. The Cobra had an 11-inch clutch disc. The entire case, including the bell housing, is made of aluminum. The T-56 has a synchromesh made up of brass synchros for the GM and Ford applications, and stainless steel in the Dodge application.
How much torque does a Ford T56 transmission have?
Featuring a 700 lb.-ft. maximum torque capacity, the T56 has an exterior case similar to the fourth-generation F-body transmission. The T56 also includes stronger, high-capacity gear sets, input shaft and output shaft used in the TREMEC TR6060.
What kind of synchros does a T56 transmission have?
The T-56 has a synchromesh made up of brass synchros for the GM and Ford applications, and stainless steel in the Dodge application. The transmission also features internal stops which render stopbolts on the shifter mechanism unnecessary.
What kind of transmission does a BorgWarner T56 have?
Borg-Warner T-56 transmission. For other uses, see T56 (disambiguation). The T-56 six speed manual transmission has been used in a wide range of vehicles from General Motors, Dodge, and Ford Motor Company. The transmission was originally designed and built by BorgWarner for the Dodge Viper later being used by GM in 1992 for…