What is an EMT 140 plate?

What is an EMT 140 plate?

The EMT 140 was the worlds first artificial reverb unit and it changed the recording world by allowing any studio to have “reverb on tap”, even smaller studios who did not have physical echo/reverb chambers. Analogue Effects.

How does an EMT 140 work?

A steel frame holds a large thin piece of sheet metal via springs attached to each corner of the outer structure. The transducer vibrates the sheet metal and two pickups mounted to the plate pick up the resulting vibrations. The EMT 140 also features a dampener that allows you to dial in decay time.

How is plate reverb made?

The plate reverb is made up of a large (2 x 3m), thin piece of sheet metal suspended from a steel frame by spring tensioners at each corner. An electrical transducer mounted to the center of the suspended plate induces plate movement, which creates the effect.

Did the Beatles use plate reverb?

In addition, in the same set, the Abbey Road Plates (a modified version of the EMT-140) and Abbey Road Chambers offer emulations of the two artificial reverb methods The Beatles were using in the ’60s. Last but not least, another iconic piece of gear used by The Beatles was the Fairchild 660/670 compressor/limiter.

What is plate reverb used for?

Plate reverbs are great for adding perceived brightness to an instrument. If you’re wondering how, it’s because you can use plate reverb to take advantage of a psychoacoustic phenomenon called the precedence effect. The precedence effect basically means that we hear higher frequencies before we hear lower ones.

Who invented plate reverb?

Back in 1957 EMT, a pioneering German company invented and build the first plate reverb called EMT 140. This model had very large proportions (8ft * 4ft) and weighed more than a quarter of a ton. These original units were quite large and expensive but still cheaper than building a reverb chamber.

What is Valhalla Ubermod?

ValhallaÜberMod, at its heart, is a stereo modulated multitap delay line. The signal is written into parallel delay lines (1 for left, 1 for right), and is read out by one or more delay taps.

What is an EMT 140 reverb unit?

The EMT 140 is an analog reverberation unit and was one of the first plate reverbs to be widely adopted by studios. An hugely important piece of recording history, it undeniably changed the way reverberation effects could be used in sound production and to this day, many reverb manufacturers seek to emulate or take cues from its sound.

What is the coolest thing about the EMT 140?

The coolest thing about the EMT 140 was the ability for engineers to manipulate the reverb time. A damping plate was hung parallel to the steel plate and could be moved closer to the steel plate with a wheel or remote control.

What is the best EMT 140 impulse response plugin?

For designers and engineers seeking to add the sound of the EMT 140 plate to their collection, the Altiverb plate 140 impulse responses and the UAD EMT 140 modeling plugin offer the convenience and versatility of modern signal processing with the sonic personality of EMT’s original 140 reverberation unit. Eargle, John.

When did the EMT 140 come out in stereo?

While the 140 was originally available only in mono, EMT released a stereo model in 1961.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top