What is gantry design?

What is gantry design?

A gantry crane is a type of overhead crane with a single or double girder configuration supported by freestanding legs that move on wheels or along a track or rail system. Larger gantry systems may run on a rail or track embedded in the ground, typically in a straight line in a dedicated work area.

How do you create a gantry girder?

Design Steps

1. Maximum Wheel Load.
2. Maximum Shear Force.
3. Section Selection For Gantry Girder.
4. Calculate the Izz, Iyy and zpof trial section selected.
5. Check for moment capacity.
6. Check For Shear Capacity.
7. Check For Buckling Resistance.

What are gantry beams?

Gantry cranes are portable cranes on wheels that allow for the lifting and transportation of the load across smooth, level surfaces. Because of the limitations of the wheels, gantry cranes are best used indoors in warehouses versus the lifting beam’s primarily outdoor use.

What are the parts of a gantry crane?

Gantry Crane Main Components Take engineering A-type gantry crane as an example, main components include: main girder, cantilever, supporting legs, trolley, driver’s cabin, lifting wire rope, hook, etc. Weihua Crane is professional material handling equipment manufacturer and servicer with largest production in global.

What are the loads should be considered in the design of crane gantry girder?

The additional loads to be considered according to Indian Standard, IS:875 – 1964, for the overhead travelling cranes is given in table above as a percentage of the maximum static wheel loads. The maximum wheel load is the reaction on a wheel due to the total load given by weight of crane plus crab and the lifted load.

What is the gantry angle?

The actual gantry angle could then be defined as the angle between vertical, as indicated by a plumb bob, and the direction of the beam axis that could be indicated by the position of a BB placed in the central axis and its shadow.

What is a gantry crane made of?

With two A-frames, upright beams and one cross beam made from aluminium to provide strength, durability and a lightweight structure, our gantry cranes make easy work of any lifting and moving tasks you may have.

What are the gantry girder components?

The web plate. Flange plate (addition of cover plate curtailed at proper sections) Stiffeners like bearing stiffeners, longitudinal stiffeners, and intermediate stiffeners. Splices for flange plate and web plate.

How does a gantry crane work?

Working principle of the gantry crane hoisting mechanism: It works by rotating the low speed shaft of the reducer to bring the reel and hook together with the wire rope and so on. The basic principle is that the rotation of the motor is transformed into the lifting and lowering movement of the load.

What is the meaning of gantry crane?

Definition of gantry crane. : a bridge crane in which the beam or bridge is carried at each end by a trestle that travels on tracks on the ground.

What is meant by gantry girder?

Gantry girders are used to provide support for overhead traveling cranes in environments such as warehouses and construction workshops, according to The Constructor. Gantry girder cranes are used in these environments to move heavy equipment and supplies around the work area by means of a hand-operated or electronically controlled crane.

What is the gantry crane?

A gantry crane is a type of overhead crane with supports that hold it up that are fixed in location. This means that the crane cannot move, so everything that it is going to lift must be brought to the crane.

What is a gantry hoist?

A gantry hoist is a hoist design with a trolley that moves along a beam to allow the operator to lift objects vertically and shift them horizontally in space as needed. Traveling gantries permit the operator to relocate the beam for more movement and flexibility.