What is the size of M10 anchor bolt?
Specifications
Certifications | |
---|---|
Diameter | Bolt: M10 (~10mm) Shield: 16mm Washer: 20mm (10.5mm inner) |
Height | Washer: 2mm |
Length | Bolt: 90mm (95mm including head) Shield: 60mm |
Thread | M10 |
What size anchor bolt do I need?
While sizing requirements vary according to local code, 1/2 inch diameter, embedded at least 7 inches, is usually the minimum. If your local regulations call for bolts to embed at least 7 inches below the foundation’s top surface, you’ll need an 8- to 12-inch-long bolt to allow for protrusion above the foundation.
How do I choose anchor bolts?
The strongest and deepest set anchor bolts with the largest diameters should be used for heavy loads fastened to the concrete. In general, the larger the diameter of the anchor bolt, the more carrying power that it has and more massive a load it can bear.
What size hole is M10?
Metric clearance and tapping drill hole sizes.
Size | Clearance Hole mm | Tapping Drill (std Pitch) |
---|---|---|
M10 | 11 | 8.5 mm |
M12 | 14 | 10.25 mm |
M16 | 18 | 14 mm |
M20 | 22 | 17.5 mm |
What size hole do I drill for a M10 bolt?
Metric Threads
Thread | Drill size for tapping standard metric threads | Clearance hole |
---|---|---|
M8 | 6.8 | 9 |
M10 | 8.5 | 11 |
M12 | 10.2 | 13.5 |
M14 | 12 | 15.5 |
What size drill bit do I need for a M10 bolt?
How deep do anchor bolts need to be?
The hole needs to be drilled 1/4″ deeper than the anchor will penetrate. The hole can’t be drilled while the fixture is in place due to the fact that the hole is larger than the diameter of the bolt being inserted into it.
How far should anchor bolts stick up?
Placement is approximately every 6 to 8 feet depending on code, with one not more than 12 inches from each end of a wall bottom plate.
Are the sizes of anchor bolts in inches or feet?
All sizes are in inches. For a printable version of our chart, download our Anchor Bolt Length Chart PDF. To learn more about anchor bolts, check out our blog on their types and uses.
Is there a chart available for referencing bent anchor bolt lengths?
This chart is available for referencing bent anchor bolt lengths. All sizes are in inches. For a printable version of our chart, download our Anchor Bolt Length Chart PDF. To learn more about anchor bolts, check out our blog on their types and uses.
What are the different types of bolt sizes in English?
ENGLISH/ METRIC BOLT SUBSTITUTION TABLE. EQUIVALENT METRIC BOLT SUBSTITUTION – ASTM GRADE BOLT SIZES F – 568 CLASS 4.6 F – 568 CLASS 8.8 F – 588 CLASS 8.8.3 F – 568 CLASS 9.8 F – 568 CLASS 10.9 A – 325M TYPE 1 OR 2 A – 325M TYPE METRIC ENGLISH 3 (MM) (INCHES)