Where do Kreepy Krauly weights go?

Where do Kreepy Krauly weights go?

For pools 4′ deep or less, use 1 hose weight 4″ to 12″ from the cleaner. For pools of 4-7′ deep, use 2 weights, one 4″ to 12″ from the cleaner and one 6′ from the cleaner. For pools from 8′ to 12′ deep, use a third weight, placed 10 ft. from the swivel end of the cleaner.

Where does the flow director go on the Lil Shark?

the flow director goes on the return port to push the water by the wall instead of in to the pool.

Why does my Kreepy Krauly not sit flat?

It’s all about getting the right amount of flow through the diaphragm so it levels out and works right. That adapter allows for adjustments due to different sized pumps so it can ge dialed in for more or less suction. Well I did install the part where I can control the suction and it still doesn’t want to lay flat.

How fast should Kreepy Krauly move?

between 8 and 12 feet per minute
Check to ensure your Kreepy Krauly is operating at the proper speed of between 8 and 12 feet per minute.

How do you run Kreepy Krauly?

  1. Turn off the pool’s water filtration pump.
  2. Place the Kreepy Krauly into the shallow end of the pool and allow it to sink to the bottom.
  3. Fill the Kreepy Krauly hose with water from the garden hose.
  4. Connect the water-filled hose to the pool inlet hole, or to the skimmer hole if you do not have a dedicated inlet.

How do you attach a pool gobbler?

Remove the cover from the inlet onto which you want to connect the PoolGobbler Pro. Put the cover back onto the inlet. Insert the universal connector into the opening in the cover and fasten it by turning the big white wheel. The teeth of the connector will spread and thus fix the PoolGobbler in the inlet.

Who makes kreepy krauly?

Pentair – Distribution
Product information

Product Dimensions 17 x 43 x 106 inches
Item Weight 1 pounds
Manufacturer Pentair – Distribution
Item model number 360042

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top