Are SRAM chains any good?
“SRAM claim the world’s longest-lasting chain with their XX1, and they are not kidding,” Kerin said. “Both the X01 and XX1 chains were so far ahead of any other chain from a pure elongation wear measure that I had to re-run the tests. The results were basically identical. Their longevity is phenomenal.”
What size chain do I need for 10-speed?
5.88 mm
10 speeds. Chain width is 5.88 mm. Same as for 9 speeds: all the manufacturers can be mixed and a chain for one speed more can be used in a pinch – an 11 speed chain in this case.
How long should a 10-speed chain last?
between 1,500 and 3,000 miles
Expect between 1,500 and 3,000 miles from a 10-speed chain. It helps to establish what counts as ‘worn out’. A chain is worn enough to affect transmission efficiency when it lengthens by 0.75% but has some life left if extended mileage is the aim, in which case it should ideally be replaced when it lengthens by 1%.
What are the differences between SRAM chains?
there’s not much difference. The crossstep pinning gives more strength, the hollow pin gives a bit lighter weight for the same strength. The nickle finish gives better corrosion resistance, but it ain’t rust proof! Otherwise the chains are pretty much the same.
What chains do pro cyclists use?
But just what gears do the pros use? For many years pros have reliably stuck with 53/39t standard chainsets, because they race at very high speeds and need big gears.
When should I replace my 10-speed chain?
If you are using a chain designed for ten or fewer gears, replace your chain as it nears the 0.75 percent mark. If you are using an eleven or twelve speed chain, replace your chain once it has reached 0.5 percent wear.
Do SRAM chains work with Shimano?
Shimano and SRAM 11-speed chains are cross-compatible. If you have a Shimano 11-speed drivetrain, a SRAM chain will work fine and vice versa, however manufacturer’s recommend pairing your components for optimal performance.
What is the difference between a 10 and 11-speed chain?
Chains for 11-speed systems are around 5.4mm wide on the outside, vs. around 5.9mm wide for 10-speed ones, so that’s 0.25mm narrower from the center of the cog tooth to the end of the chain pin on each side.
What is the best chain for a 10 speed MTB?
Reviews – The Best Chains for MTB. 1 SRAM 10. Specs. Bike Speed: 10 Speed. Material: Steel. 2 KMC X9 SL 9. 3 KMC X10 SL. 4 Wipperman Connex 11S0. 5 Shimano CN-HG53.
What is the best speed for a KMC chain?
The KMC chains are more cooperative with different speeds. The most common and popular choice is the 10 speed. How do I choose a bike chain? The very first thing you should consider is the rear sprockets.
What size is a 7 speed bike chain?
A 7-speed chain measures a width of 7.3 mm. An 8-speed bike chain measures a width of 7.1 mm. A 9-speed bike chain measures a width of 6.6 to 6.8 mm. A 10-speed bike chain measures a width of 6.2mm on Shimano and Campagnolo brand bikes. Other sizes are 5.8mm for other bike brands like KMC, Shimano, and Campagnolo.
How to choose a bike chain for your bike?
Here are things to remember when selecting a new chain for your bicycle. When picking out a bike chain, it must fit with the speeds of your bike. A 6 speed bike chain will not fit an 11 speed chains and vice versa, as each chain has differing widths. For the chain to function properly, it shouldn’t be too snug or too loose.