How do I connect an old AirPort Express to WIFI?

How do I connect an old AirPort Express to WIFI?

How to use AirPort Express for AirPlay 2 with existing router

1. Plug the AirPort Express into the wall and wait until it boots up.
2. Go into your Wi-Fi settings on your iPhone, iPad, or Mac and join the new AirPort network.
3. Click on the Other Options button.
4. Select “Add to an existing network.”

How do I soft reset my AirPort Express?

Soft reset: Make sure that the base station is connected to power. Press and hold the reset button for 1 second, then release the button. The status light on the base station flashes amber.

How do I reset airport WiFi?

Factory-default reset

1. Disconnect the base station from power.
2. While holding down the reset button, plug the base station into power and continue to hold the reset button for about 5 seconds, until you see the three status lights turn on. Then release the button.

How do I reset my Apple AirPort Express Base Station?

Hard reset: Press and hold the reset button for about 5 seconds, until the status light on the base station flashes amber rapidly. Then release the button. Wait about a minute for the base station to finish restarting. Open AirPort Utility, which is in the Utilities folder of your Applications folder.

How do I Reset my Airport Express to default settings?

With the AirPort Express plugged into power, press and hold the device’s reset button for 10 seconds. A green light will flash for a bit and then the device will reset itself — a process that takes about 45 seconds. Once reset, you can configure it with the AirPort Express Assistant or the AirPort Admin Utility.

How do I Reset my AirPort Extreme base station?

Reset 802.11b/g models of AirPort Extreme Base Station. Locate the reset button on the base station, next to the ports. When instructed to do so, press this button with a pen or straightened paperclip. Soft reset. Make sure that the base station is connected to power. Hold down the reset button for 10 seconds, then release the button.

How long does it take to reset an AirPort device?

The green light will flash for four times; this is the time when you should release the reset button, and the device will reboot. Wait for around 1 minute and then go on configuring your device with Airport Admin Utility or AirPort Express Assistant.

How do I Reset my airport graphite base station?

If you’re using an AirPort Graphite or AirPort Snow (Dual Ethernet) base station, connect your computer directly to the base station using an Ethernet cable. Make sure that the base station is connected to power. Hold down the reset button for 1 second.