What is the function of hose reel?
Fire hose reels are located to provide a reasonably accessible and controlled supply of water to combat a potential fire risk. They are ideal for large high risk environments such as schools, hotels, factories etc.
What is a fire hose reel system?
Fire Hose Reels Fire hose reel systems are made up of pumps, pipes, water supply and hose reels located to ensure proper coverage of water to combat a fire. Manual systems are activated by releasing a valve, which enables the water to flow through the hose.
What is the correct order of operation for using a fire hose?
Using the reel: ⇒ Turn on the valve. ⇒ Reel the hose out until you have enough length to reach the flame. ⇒ Move the nozzle into the open position to allow the flow of water. ⇒ Aim the stream of water at the base of the fire, always from a safe distance.
What is the length of hose reel?
Fire Hose Reel, Diameter: 50-150 mm, Reel Length: 10-30 m.
What is the diameter of a hose reel?
Hose Reel Drum
|HOSE REEL DRUM|
|TYPE||TYPE-2 RUBBER (IS:444)||TYPE-2 THERMOPLASTIC (IS:12585)|
|DIAMETER||20 mm DIA|
|OPERATING PRESSURE RANGE||7 to 10 KG/CM2|
|BURSTING PRESSURE||32.5 KG/CM2|
How do you test a fire hose reel?
Fire hose reels require regular visual examination by a competent person. Also an annual flow rate test and a pressure test are required. The fire hose must be pressure tested every five years. The test details should be recorded on a service label attached to the reel.
What must not be done when using hose reel?
Hose Reels are suitable for Class A fires: Paper, Textiles, Wood, Most Plastics and Rubber. Do NOT use on electrical fires, remember water conducts electricity, so using a fire hose reel on it could lead to electrocution!
What is the hose reel pressure?
Hose checks – hose reels are fully unwound and the condition of the hose and valves/nozzles checked. Pressure test – The equipment is filled with water presurised and inspected for any leaks to test the integrity of the reel and hose. Maximum working pressure usually 12 bar so test pressure is typically 18 bar.
What diameter is hose pipe?
The US standard was defined by NFPA 1963, “Standard for Fire Hose Connections”, then later by ANSI-ASME B1. 20.7, which specifies 11⁄16 inches (27 mm) diameter straight (non-tapered) thread with a pitch of 11.5 threads per inch (TPI).
What is a cargo offloading hose reel?
Cargo Offloading Hose Reel Systems Designed for use on FPSO, FSO and FLNG vessels, the FES Cargo Offloading Hose Reel System provides an integrated solution for ship to ship and ship to shore offloading activities.
What is the owner’s manual for the hose reel for?
This manual contains all the information necessary for you to use the equipment correctly. The user is required to read this manual before use and to operate the hose reel in accordance with the instructions it contains. This owner’s manual and maintenance guide must be kept available for frequent use.
What is fire hose reel&cabinets testing and commissioning method statement?
This Fire Hose Reel & Cabinets Testing and Commissioning Method Statement is to provide guidance in carrying out and controlling the testing and commissioning of Fire Fighting system for the project, in accordance with the approved Project Quality Plan, contract specifications and Commissioning plan.
What should I look for when buying a fire hose reel?
g) Check that all the Fire hose reel are free from obstructions and rust if any. h) Ensure that all System equipments and devices are properly identified by tags / labels. i) The system fire pumps are to be commissioned, signed off and available for use to pressurize and supply the system.