What is the standard height of a toilet in Australia?
Most toilets measure about 15″ in height, which is likely to be sufficient for the majority of users. However, it is possible to purchase taller models that offer an extra inch or two.
What is a standard height toilet?
Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. The standard ADA (Americans with Disabilities Act) height toilets must have, a 17”-19” floor to bowl rim height, including the seat. You should also consider the toilet rough-in from the wall, which is commonly 12”.
What is the best standard height toilet?
The ideal height for your toilet will depend on three things. Standard toilets are usually around 15 inches high at the seat. If you are a tall person, that could be too low for you. You might want to check into a floor-mounted “comfort height” toilet that is 17 to 19 inches in height or elevated toilet seats.
How long is a comfort height toilet?
Seat Heights Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.
What is the difference between standard height and comfort height toilets?
The difference between standard height and comfort height toilets is approximately two inches. It will measure 17 to 19 inches from the floor to the seat. Often this height toilet is priced less than the standard height toilet.
Why are new toilets taller?
Comfort height, sometimes referred to as ADA Compliant Height, toilets have become increasingly popular in the last several years, in part because the higher seat makes them easier for the elderly to use. They measure between 17 and 19 inches from the floor, a distance more comparable to standard chair height.
Can a toilet be too tall?
Anything that’s lower than 17 inches, it’s a standard height toilet. Or higher than 19 inches, it will be a non-standard toilet with an Exception clause to 604.4 of the American Disability Act for toilet seats.
Are higher toilets better?
The taller seat simply makes it easier to sit down and stand up. The higher seat alleviates discomfort that comes from squatting down and cocking the knees out to the sides. A comfort height toilet is especially beneficial for taller people, seniors and anyone with knee or back pain.
Why are toilets so low?
It is claimed by some that this low height forces users into a position which enables better bowl function / flow and that in fact raising the feet off the ground further increases that function. There have been several toilets / seats (higher at he front) and patents for accessories which achieve this.
What is the standard toilet height in Australia?
What’s the standard toilet height in Australia? The height of the toilet in Australia is 15 inches (400-430mm) from the ground to the toilet’s seat. The height is measured based on the ergonomic chair height (350mm-150mm). Hence, it is easy to use the toilet. ———– This post was written by Shakira Shareef.
What are the Different Toilet Seat heights?
There are two types of seat heights: standard and chair. Standard: Typically 15-17″ off the ground, standard-height toilets are common in most households and are an ideal choice for homes with children. Chair: Typically 17-19″ off the ground, chair-height toilets offer additional comfort and are an ideal choice for those with restricted mobility.
What is the standard height of a toilet roll holder?
A toilet roll holder’s standard height is about 650mm (up to 800mm) from the floor. A measurement of 900mm wide is standard for toilet space. Having enough electrical outlets for hair dryers, shavers and straighteners is something to consider.
What is the standard height of a towel rail?
The height of your towel rail can be flexible but a standard height for it to sit above the floor is 1200mm. A dressing gown hook can also be adjusted to suit your height but 1500mm is typical. A toilet roll holder’s standard height is about 650mm (up to 800mm) from the floor. A measurement of 900mm wide is standard for toilet space.